This item has been shown 1 times.
The parallel interface card gives you the capability to generate reports, listing, labels and letters with your Apple computer using a variety of parallel-interfaced printers, and is fully firmware and hardware compatible with the previous Apple Parallel and electronics cards. Parallel Interface card:
-Has full 8 bit input and output ports so user can look for printer error functions.
-Has switch selection of strobe and acknowledge polarities and strobe lenght, so there is no configuration block to wire.
-Has switch selection ROM code so there is only one product to buy.
-Provides full control of I/O if required by user.System -To use the parallel interface card, you will need the following system:
-Apple II plus with 48K
-Apple II Disk Drive with controller.
-Printer with parallel interface -Requires the use of an external cable available as Apple Part No. A2M0052.