This item has been shown 24 times.
Cisco/LinkSys SRW2008 Managed 8-port 10/100/1000 Ethernet Switch with
8 10/100/1000 RJ-45 ports2 shared MiniGBIC (SFP) slots
Condition: Good, working. I tested all the ports, including SFPs, and reset the switch to factory settings. Username/password: admin/password.
NOTE: The original power supply died and was replaced with a new 12V/2.5A 100-240V 50/60Hz one (2.5 Amps is more than the minimum needed 2 Amps, which is good). The original connector was re-soldered to the new power supply, as shown on the photo.
NOTE: The switchmanagement webpageseems to require Internet Explorer 11 in compatibility mode. It's not rendered correctly in Chrome or Edge. It's a common problem with these switches.
The switch shows:
Device InformationSystem Name IP Address 192.168.1.254 Subnet Mask 255.255.255.0 Address Mode Default Base MAC Address 3c:df:1e:b7:44:ca System InformationModel Name SRW2008 Hardware Version 00.03.00 Boot Version 1.0.1 Firmware Version 1.0.4
See the user guide here.