When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LDM-IR20 Infrared 980nm Night Vision designator Short - Long Range for Tube or CCD Type NV Units Military Grade 300yds+
USA BUYERS ONLY
Note!Export of this device described herein is strictly prohibited without a valid export license issued by the U.S. Department of State office of Defense Trade Controls, as prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulation, Parts 120-130, and/or the U.S. Department of Commerce. For further information contact the Office of Defense Trade Control and/or the U.S. Department of Commerce.
Please Verify Compatibility with your Night Vision or CCD unit before offerding. Some sets will only operate with IR designators that leave a red trace. The 980nmlaser leaves no Visible Trace at all. If your set is not compatible with the laser it will not be viewable. With all the different tube and CCD night vision units on the market I have no way of knowing what will be compatible or not. I can offer IR lasers in lower wavelengths that will work with any NV set also.
We have received numerous requests for this type of IR designator so this new item is a compilation of what most users want.
KEY Features
Slim line case 3.5 inch total length x 3/4 inch width so it will fit a full size-compact pistol and any type of rifle shotgun with a rail.
Optical filtered lens reduces ballooning, haze and halos to aid the laser in producing the best possible dot.
Constant On-Off locking push button switch along with a remote momentary wire switch.
Enough power to reach 300yds+.
Small Dot that will not over power the targeted area even at close range.
Dot will not cause ballooning, flair, haze or cotton balling when viewed through your NV or CCD unit.
Mil-Spec module and housing able to handle high recoil pressure of a .308 / 7.62.
Fully O-ring sealed to prevent contamination by dust, sand, snow or water.
Low operating temperatures able to function between -20C (-4F) to +50C (122F)
A push on-off power switch controls the laser activation.
Weapon mount included.
1 CR123A 3 volt 1500mah battery included.
IR20 SPECIFICATIONS
Case material:6160 T6 Series machined aircraft aluminum with black anodized military hard coated finish. High impact, chemically resistant engineering polymer laser housing.Wavelength20.980nm IIIIbLens:High temperature, shock mounted, impact resistant, Boro Float Glass lens.Battery1 CR123A 3 Volt1500mah MTTF (Mean Time To Fail)5,000 hoursMax Beam Diameter 300yds12mmMin Beam Diameter 50yds6mmOperating Temp -20C~50C Storage Temp -30C~80C Dimensions 84mm(3.3in) X 25mm(.98in) front 22mm(.86in) rear Weight 57g(2oz) Color Black
THIS IS A INFRARED ILLUMINATOR THAT CAN ONLY BE SEEN WITH NIGHT VISION OR CCD SETS.
The LDM-IR20 works perfect for short- medium-long range night vision designator applications because it uses a high grade mil-spec laser module that will function far beyond regular IR Laser designator\'s while still having the capability of close range targeting.
The LDM-IR20 incorporates 980nm Infrared module with a constant On-Off push button switch leaving your hand free to hold your weapon instead of a wire. Onepush of the button is all you need to activate the laser designator. The highly visible ( through a NV unit which is magnified) dot is able to be seen at distances up to 1/2 mile (conditions permitting).
PrettyBordersPlus free Template Maker by ISDN*tek
