When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1 . PAYMENT
PAYPAL or Cash or L/C
2 .Shipping
DHL.FEDEX.UPS.TNT .ARAMEX . SHENFENG KOREA POST SERVICE with Provide International tracking no
3. Warranty
New items : 1 Year
4. Return Acceptable
New items : within 15days deliveryed return acceptable .under no damaged ,no open box .not used
Used item : within 15days deliveryed return acceptable under no broken item
5, This item not included buyer side import taxes ,duty ,
6 .Contact point : SKYPE . samkim721
-------------------- DATA SHEET style=\"margin: 0.2em 0px; padding: 0px; box-sizing: border-box; -webkit-tap-highlight-color: transparent; margin-block-start: 1em; margin-block-end: 1em; overflow-wrap: break-word; word-break: normal;\">Series
Model
Software Version
S5735-L
S5735-L12T4S-A
V200R019C00 and later versions
Appearance and StructureFigure 5-487S5735-L12T4S-Aappearance
1
Twelve10/100/1000BASE-T ports
2
Four 1000BASE-X ports
Applicable modules:
- GE optical module
- GE-CWDM optical module
- GE-DWDM optical module
- GE copper module
- 10GE SFP+ optical module (only used for stack connection, a maximum transmission distance of 0.4 km, OSXD22N00 not supported, applicable in V200R019C10 and later versions)
- 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and later versions)
- 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions)
- 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)
3
One console port
4
One ETH management port
5
One USB port
6
One PNP button
NOTICE:
To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.
To reset the switch, press the button.
Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7
Ground screw
NOTE:It is used with aground cable.
8
Jack for AC power cable locking strap
NOTE:The AC power cable locking strap is not delivered with the switch.
9
AC socket
NOTE:
It is used with anAC power cable.
-
-
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use anEthernet cable.Table 5-1308describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.Table 5-1308Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3, IEEE802.3u, IEEE802.3ab
Working mode
10/100/1000 Mbit/s auto-sensing
Maximum transmission distance
100 m
1000BASE-X port
When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.Table 5-1309describes the attributes of a 1000BASE-X Ethernet optical port.Table 5-1309Attributes of a 1000BASE-X Ethernet optical port
Attribute
Description
Connector type
LC/PC
Optical port attributes
Depend on the module used
Standards compliance
IEEE802.3z
Console port
The console port is connected to a console for on-site configuration. The port must use aconsole cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, seeTable 5-1310.Table 5-1310Attributes of a console port
Attribute
Description
Connector type
RJ45
Standards compliance
RS-232
Working mode
Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
ETH management port
You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use anEthernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port.Table 5-1311describes the attributes of an ETH management port.Table 5-1311Attributes of an ETH management port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3
Working Mode
10/100 Mbit/s auto-sensing
Maximum transmission distance
100 m
In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see \"First Login to a Switch\" in theConfiguration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.
USB port
The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.
