When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
This unit powers on, lights up, and comes to a ready status. The unit has been reset to the factory default settings. See console log below. There is some paint chipping present on the top of the unit, but this is cosmetic in nature.
COMPONENTS INCLUDED IN THIS sale:• (1) - PALO ALTO NETWORKS PA-2000 SERIES PA-2050 ENTERPRISE SECURITY FIREWALL APPLIANCE NETWORK SWITCH
• (2) - RACKMOUNT EAR
• (1) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:The following is the Console Log from this item:
INIT: Sending processes the TERM signal
Stopping PAN Software: [ OK ]
Shutting down NFS mountd: [ OK ]
Shutting down NFS daemon: nfsd: last server has exited, flushing export cache
[ OK ]
Shutting down NFS services: [ OK ]
Stopping ha-sshd: [ OK ]
Stopping sshd: [ OK ]
Stopping xinetd: [ OK ]
Stopping NFS statd: [ OK ]
Stopping portmap: [ OK ]
Shutting down kernel logger: [ OK ]
Shutting down system logger: [ OK ]
Stopping Networking: SIOCGIFFLAGS: No such device
[ OK ]
Starting killall: [ OK ]
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Saving random seed:
Syncing hardware clock to system time
Unmounting pipe file systems:
Unmounting file systems:
Please stand by while rebooting the system...
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
Welcome to the PanOS Bootloader.
U-Boot 5.0.14.0-12 (Build time: Jul 25 2014 - 15:32:36)
BIST check passed.
KESTREL board revision major:2, minor:0, serial #: 0003A100305
OCTEON CN3120-CP pass 1.1, Core clock: 500 MHz, DDR clock: 265 MHz (530 Mhz data
rate)
DRAM: 1024 MB
Clearing DRAM........ done
Using default environment
Flash: 64 MB
Net: octeth0, octeth1, octeth2
Bus 0 (CF Card): not available
USB: (port 0) No USB devices found.
Autoboot to default partition in 5 seconds.
Enter \'maint\' to boot to maint partition.
Full fpga programming SUCCESS
Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100
000), size 0x985080
## Loading Linux kernel with entry point: 0xffffffff81105cd0 ...
Bootloader: Done loading app on coremask: 0x3
Linux version 2.6.32.13-mp-5.0.14.0.12 />(gcc version 4.3.3 (Cavium Networks Version: 2_0_0 build 99) ) #12 SMP Fri Jul 2
5 15:29:38 PDT 2014
CVMSEG size: 2 cache lines (256 bytes)
Cavium Networks SDK-2.0
bootconsole [early0] enabled
CPU revision is: 000d0102 (Cavium Octeon)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000000042000 @ 00000000019de000 (usable after init)
memory: 0000000006400000 @ 0000000001b00000 (usable)
memory: 0000000007c00000 @ 0000000008200000 (usable)
memory: 0000000020000000 @ 0000000020000000 (usable)
memory: 000000000fc00000 @ 0000000410000000 (usable)
INIT: version 2.86 booting
Welcome to PanOS
Setting clock (utc): Fri Jun 15 08:32:28 PDT 2018 [ OK ]
Starting udev: [ OK ]
Setting hostname 2000: [ OK ]
Checking filesystems:
Running filesystem check on sysroot0: [ OK ]
Running filesystem check on pancfg: [ OK ]
Running filesystem check on panrepo: [ OK ]
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting Networking: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting NFS statd: [ OK ]
Generating SSH2 DSA host key: [ OK ]
Generating SSH2 RSA host key: [ OK ]
Starting sshd: [ OK ]
Starting ha-sshd: [ OK ]
Starting xinetd: [ OK ]
Starting ntpd: [ OK ]
Starting NFS services: [ OK ]
Starting NFS daemon: [ OK ]
Starting NFS mountd: [ OK ]
Starting PAN Software: [ OK ]
PA-2050 login: admin
Password:
Warning: Your device is still configured with the default admin account credenti
als. Please change your password prior to deployment.
admin@PA-2050> show system info
lines 1-23
lines 2-24
hostname: PA-2050
lines 3-25
ip-address: 192.168.1.1
lines 4-26
netmask: 255.255.255.0
lines 5-27
default-gateway:
lines 6-28
ipv6-address:
lines 7-29
ipv6-link-local-address: unknown
lines 8-30
ipv6-default-gateway:
lines 9-31
mac-address: 00:1b:17:04:4f:00
lines 10-32
time: Fri Jun 15 08:46:37 2018
lines 11-33
uptime: 0 days, 0:08:01
lines 12-34
family: 2000
model: PA-2050
serial: 0003A100305
sw-version: 5.0.14
app-version: 449-2321
app-release-date: unknown
av-version: 0
av-release-date: unknown
threat-version: 0
threat-release-date: unknown
wildfire-version: 0
wildfire-release-date: unknown
url-filtering-version: 0
global-protect-datafile-version: 0
global-protect-datafile-release-date: unknown
logdb-version: 5.0.2
platform-family: 2000
logger_mode: False
vpn-disable-mode: off
operational-mode: normal
multi-vsys: off
admin@PA-2050> Please Click Here and Read Our Sales PoliciesSearchBy37 - 201262 | Loc: DG4 | L: Tommy |T: | PM: Nick | QTY: 0| Plan: L- Q2 5 pounds or more |24.00\"x22.00\"x6.00\"24.00lbs |Start: $79.99 | BIN: $0.00 | |6/18/2018 ||Computers/Tablets & Networking::Enterprise Networking, Servers::Firewall & VPN Devices