Tripp Lite SmartPro 120V 1.5kVA 1.35kW UPS, 2U, LCD, USB, DB9 - SMART1500RMXL2UA For Sale

This sale is for a used UPS, tested and working, in good cosmetic condition.Retail price: $855 on Amazon!Includes what is shown in the pictures only: UPS itself, pre-attached US power cord with plug, and a rack mounting kit that the UPS can sit on.Tested it at a 200W draw and as shown in the runtime chart, it lasted about an hour on batteries only.Payment via PayPal only.
Product Info Page:

[link removed by ]

Runtime Chart:

[link removed by ]

Overview

The SMART1500RMXL2UA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RMXL2UA switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Featuring eight NEMA 5-15R outlets (four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RMXL2UA has an internal battery that provides 14 minutes of support at half load and 4.9 minutes at full load. A front-panel LCD screen lets you monitor important data, such as load level, voltage, battery charge and estimated runtimes. Adding external battery packs, such as Tripp Lite’sBP36V15-2U(sold separately), provides extended runtime.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 145V without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s PowerAlert® software (available via free download), SMART1500RMXL2UA enables safe unattended system shutdown and file saves in case of a prolonged power failure.

FeaturesProtects Mission-Critical Rack-Mounted Equipment

• Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
• Audible alarm signals loss of utility power, overload, low battery and fault conditions
• 8 NEMA 5-15R outlets
• 10 ft. power cord with 120V NEMA 5-15P input
• 0.9 power factor rating
• 570-joule surge suppression rating

Reliable Battery Backup with Expandable Runtime

• Supports half load up to 14 min. and full load up to 4.9 min.
• Internal batteries designed for hot-swap field replacement
• 95% line-power efficiency rating saves money in energy costs
• Expandable runtime with optional external battery packs, such as Tripp Lite’sBP36V15-2U

2 Load Banks with Switchable Outlets

• Can control 4 outlets remotely to reboot equipment or shed nonessential loads

Automatic Voltage Regulation (AVR)

• Maintains 120V nominal output over input range of 83V–145V without using battery power

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance

Interactive LCD Screen

• Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
• Rotates for easy viewing in rack-mount or tower configurations

Network Management Cards

• Compatible with Tripp Lite UPS management card style=\"box-sizing: border-box;\">Communications Ports
  
  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite\'s PowerAlert software, available via FREE download from www.tripplite.com/poweralert
  • EPO port supports emergency shutdown in large facilities
  
  Versatile Installation Options
  
  • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
  • Mounts on wall or 2-post rack with optional2POSTRMKITWMaccessory
  • Mounts in upright tower position with Includes
    • SMART1500RMXL2UA SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS
    • Mounting hardware
    
    Case Studies
    • Andover Public Schools Case Study - VoIP Network Protection Volt Amp Capacity (VA)1500Output kVA Capacity (kVA)1.5Output Watt Capacity (Watts)1350Output kW Capacity (kW)1.35Output Capacity DetailsOutput is reduced to 1200 watts maximum when used with external battery packsPower Factor0.9Nominal Output Voltage(s) Supported110V; 115V; 120VNominal Voltage Details120v nominal output in battery modeFrequency Compatibility60 HzOutput Voltage Regulation (Line Mode)-14%, +6%Output Voltage Regulation (Battery Mode)+/- 5%Output Receptacles(8) 5-15RLoad Management ReceptaclesTwo switchable two-outlet 5-15R load banksOutput AC Waveform (AC Mode)Sine waveOutput AC Waveform (Battery Mode)Pure Sine waveINPUTRated input current (Maximum Load)12ANominal Input Voltage(s) Supported120V ACUPS Input Connection Type5-15PInput Circuit Breakers15AUPS Input Cord Length (ft.)10UPS Input Cord Length (m)3.0Recommended Electrical Service15A 120VInput PhaseSingle-PhaseBATTERYFull Load Runtime (min.)4.9 min. (1350w)Half Load Runtime (min.)14 min. (675w)Expandable Battery RuntimeExtended runtime supported via optional external battery packsExternal Battery Pack CompatibilityBP36V15-2U(limit 1);BP36V42-3U(multi-pack compatible);BP36V27-2US(multi-pack compatible)DC System Voltage (VDC)36Battery Recharge Rate (Included Batteries)Less than 4.5 hours from 10% to 90% (typical, full load discharge)Internal UPS Replacement Battery CartridgeRBC93-2UBattery AccessFront panel battery access doorBattery Replacement DescriptionHot-swappable, user replaceable batteriesExpandable RuntimeYesVOLTAGE REGULATIONVoltage Regulation DescriptionAutomatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145Overvoltage CorrectionInput voltages between 127 and 145 are reduced by 12%Undervoltage CorrectionInput voltages between 95 and 108 are boosted by 12%Severe Undervoltage CorrectionInput voltages between 83 and 94 are boosted by 24%USER INTERFACE, ALERTS & CONTROLSFront Panel LCD DisplayFront panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)Switches3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functionsAlarm Cancel OperationPower-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option availableAudible AlarmAudible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditionsSURGE / NOISE SUPPRESSIONUPS AC Suppression Joule Rating570UPS AC Suppression Response TimeInstantaneousEMI / RFI AC Noise SuppressionYesPHYSICALIncluded Mounting Accessory Description4 post rackmount installation accessories includedInstallation Form Factors Supported with Optional Accessories2 post rackmount(2POSTRMKITWM); Wallmount(2POSTRMKITWM); Tower(2-9USTAND)Primary Form FactorRackmountUPS Power Module Dimensions (hwd, cm)8.76 x 43.94 x 34.16Rack Height (U Spaces)2Minimum Required Rack Depth (cm)50.80UPS Power Module Weight (kg)21.09UPS Shipping Dimensions (hwd / cm)21.59 x 59.44 x 50.55Shipping Weight (kg)23.3Cooling MethodFanUPS Housing MaterialSteelMinimum Required Rack Depth (mm)508Primary UPS Height (mm)88Primary UPS Width (mm)439Primary UPS Depth (mm)342Shipping Height (mm)216Shipping Width (mm)594Shipping Depth (mm)505ENVIRONMENTALOperating Temperature Range+32 to +104 degrees Fahrenheit / 0 to +40 degrees CelsiusStorage Temperature Range+5 to +122 degrees Fahrenheit / -15 to +50 degrees CelsiusRelative Humidity0 to 95%, non-condensingAC Mode BTU / Hr. (Full Load)237Battery Mode BTU / Hr. (Full Load)751AC Mode Efficiency Rating (100% Load)95%COMMUNICATIONSCommunications InterfaceUSB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interfaceNetwork Management Monitoring Port DescriptionSupports detailed monitoring of UPS and site power conditionsPowerAlert SoftwareFor local monitoring via the UPS’s built-in communication ports , download PowerAlert Local software at CableUSB and DB9 cabling includedWatchDog CompatibilitySupports Watchdog application, OS and hard-reboot restart options for remote applicationsLINE / BATTERY TRANSFERTransfer Time4 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)Low Voltage Transfer to Battery Power (Setpoint)83High Voltage Transfer to Battery Power (Setpoint)145SPECIAL FEATURESGrounding LugBack panel grounding lugCold Start (Startup in Battery Mode During a Power Failure)Cold-start operation supportedHigh Availability UPS FeaturesHot swappable batteriesGreen Energy-Saving FeaturesGreater than 95% efficiency - GREEN UPS; Individually controllable load banksCERTIFICATIONSUPS CertificationsMeets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)