ot 2 Juniper Networks EX2200-48T-4G 750-026325 24-Port Gigabit 4x SFP No Ears For Sale

Lot 2 Juniper Networks EX2200-48T-4G 750-026325 24-Port Gigabit 4x SFP No EarsUp for sale in this sale is a used Juniper Networks EX2200-48T-4G switch. These have been defaulted and tested to be in good working order. They will come with a 14-day hardware warranty which will start upon the date of arrival. They show signs of wear from transportation. These switches have 48 RJ-45 gigabit ports on them. They also have four SFP ports on them. This sale WILL NOT INCLUDE any cables, cords, rack ears, or any other accessories not pictured. I will not be responsible for compatibility or setup issues. Pictures are of the actual item being sold. If it isn\'t pictured then it isn\'t included.NOTE: Login is \"root\" No password is setup.

Questions are encouraged and don’t forget to check out my other sales.

Also don\'t forget to check out my About Me page.Free shipping is only for the continental US States. Free shipping is not available for P.O. Boxes, Alaska, Hawaii, or Puerto Rico sorry. Shipping is not available for APO/FPO boxes sorry.In order to help me keep my prices low and shipping free, feel free to leave a five star DSR rating. If you feel I don’t deserve five stars feel free to let me know how I can improve future transactions.
GSP 12LB 9x17x23Switch X1
U-Boot 1.1.6 (Jul 26 2011 - 03:19:50)Board: EX2200-48T-4G 4.20
EPLD: Version 04.100311 (0x10)
DRAM: Initializing (512MB)
Flash: 8 MBFirmware Version:01.00.00
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/arm U-Boot loader, Revision 1.1
(builder dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x889590+0xdd8ac syms=[0x4+0xf0f80+0x4+0xc89d0]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:03 UTC
builder re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 503205888 (479 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on m
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,
mge0: hardware MAC address b0:a8:6e:0e:88:bf
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem irq 2
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041ff
pci0: <PCI bus> on pcib0
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xe8000000-0xebffffff ir
Initializing product: 77 ..
bmeb: bmeb_lib_init done 0xc348a800, addr 0xc1d608e8
bme0:Virtual BME driver initializing
Timecounter \"CPU Timer\" frequency 200000000 Hz quality 1000
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s2a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-arm package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-arm-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex-2200 package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-2200-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex22x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex22x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36870 free (22 frags, 4606 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 61686 free (350 frags, 7667 blocks, 0.6% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188779 free (27 frags, 23594 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31576 free (32 frags, 3943 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=69 fileid
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-ser
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Fri Jan 22 07:12:39 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36358 free (22 frags, 4542 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:03 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CU0212295604 EX2200-48T-4G
Routing Engine 0 REV 20 750-026325 CU0212295604 EX2200-48T-4G
FPC 0 REV 20 750-026325 CU0212295604 EX2200-48T-4G
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
PIC 1 REV 20 750-026325 CU0212295604 4x GE SFP
Power Supply 0 PS 100W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
Temp FPC 0 CPU OK 29 degrees C / 84 degrees F
FPC 0 Exhaust Area OK 45 degrees C / 113 degrees F
FPC 0 EX-PFE1 OK 29 degrees C / 84 degrees F
FPC 0 EX-PFE2 OK 30 degrees C / 86 degrees F
FPC 0 Local Intake OK 25 degrees C / 77 degrees F
FPC 0 Remote Intake OK 25 degrees C / 77 degrees F
FPC 0 GEPHY1 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY2 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY3 OK 30 degrees C / 86 degrees F
FPC 0 GEPHY4 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY5 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY6 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY7 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY8 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY9 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY10 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY11 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY12 OK 25 degrees C / 77 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed{master:0}
root> show ex2200-48t-4g
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]{master:0}
root>Switch X2U-Boot 1.1.6 (Jul 26 2011 - 03:19:50)Board: EX2200-48T-4G 4.20
EPLD: Version 04.100311 (0x10)
DRAM: Initializing (512MB)
Flash: 8 MBFirmware Version:01.00.00
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) foundELF file is 32 bit
Consoles: U-Boot consoleFreeBSD/arm U-Boot loader, Revision 1.1
(builder dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is set
new boot device = disk0s1:
Loading /boot/defaults/loader.conf
/kernel data=0x889590+0xdd8ac syms=[0x4+0xf0f80+0x4+0xc89d0]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.3R12.4 #0: 2016-01-20 04:27:03 UTC
builder re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 503205888 (479 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0
mge0: hardware MAC address b0:a8:6e:80:d3:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem irq 23 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem irq 9 on mbus0
pci0: <PCI bus> on pcib0
mpfe1: <Juniper EX-series Packet Forwarding Engine> mem 0xe8000000-0xebffffff irq 78 at device 1.0 on pci0
Initializing product: 77 ..
bmeb: bmeb_lib_init done 0xc348a800, addr 0xc1d608e8
bme0:Virtual BME driver initializing
Timecounter \"CPU Timer\" frequency 200000000 Hz quality 1000
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Kernel thread \"wkupdaemon\" (pid 42) exited prematurely.
Trying to mount root from ufs:/dev/da0s1a
Invalid time in real time clock.
Check and reset the date immediately!
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_12_3_0
Verified jboot signed by PackageProduction_12_3_0
Verified jbase-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted fips-mode-arm package on /dev/md1...
Verified manifest signed by PackageProduction_12_3_0
Verified fips-mode-arm-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jcrypto-ex package on /dev/md2...
Verified manifest signed by PackageProduction_12_3_0
Verified jcrypto-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jdocs-ex package on /dev/md3...
Verified manifest signed by PackageProduction_12_3_0
Verified jdocs-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jkernel-ex-2200 package on /dev/md4...
Verified manifest signed by PackageProduction_12_3_0
Verified jkernel-ex-2200-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jpfe-ex22x package on /dev/md5...
Verified manifest signed by PackageProduction_12_3_0
Verified jpfe-ex22x-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jroute-ex package on /dev/md6...
Verified manifest signed by PackageProduction_12_3_0
Verified jroute-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jswitch-ex package on /dev/md7...
Verified manifest signed by PackageProduction_12_3_0
Verified jswitch-ex-12.3R12.4 signed by PackageProduction_12_3_0
Mounted jweb-ex package on /dev/md8...
Verified manifest signed by PackageProduction_12_3_0
Verified jweb-ex-12.3R12.4 signed by PackageProduction_12_3_0
Executing reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36358 free (22 frags, 4542 blocks, 0.0% fragmentation)
** /dev/da0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 61628 free (236 frags, 7674 blocks, 0.4% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 188779 free (27 frags, 23594 blocks, 0.0% fragmentation)
** /dev/da0s4d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 31579 free (43 frags, 3942 blocks, 0.1% fragmentation)
rm: /var/etc/pam.conf: Operation not permitted
Creating initial configuration...mgd: Running FIPS Self-tests
veriexec: no signatures for device. file=\'/sbin/kats/cannot-exec\' fsid=69 fileid=51404 gen=1 uid=0 pid=463
mgd: FIPS Self-tests Passed
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-ser
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
Initialize /var subdirs
starting local daemons:set cores for group access
.
Fri Jan 22 04:30:17 UTC 2016
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 36870 free (22 frags, 4606 blocks, 0.0% fragmentation)Amnesiac (ttyu0)login: root--- JUNOS 12.3R12.4 built 2016-01-20 04:27:03 UTC
root@:RE:0% cli
{master:0}
root> show system alarms
No alarms currently active{master:0}
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CU0212296258 EX2200-48T-4G
Routing Engine 0 REV 20 750-026325 CU0212296258 EX2200-48T-4G
FPC 0 REV 20 750-026325 CU0212296258 EX2200-48T-4G
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x 10/100/1000 Base-T
PIC 1 REV 20 750-026325 CU0212296258 4x GE SFP
Power Supply 0 PS 100W AC
Fan Tray Fan Tray{master:0}
root> show chassis environment
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
Temp FPC 0 CPU OK 29 degrees C / 84 degrees F
FPC 0 Exhaust Area OK 46 degrees C / 114 degrees F
FPC 0 EX-PFE1 OK 29 degrees C / 84 degrees F
FPC 0 EX-PFE2 OK 29 degrees C / 84 degrees F
FPC 0 Local Intake OK 25 degrees C / 77 degrees F
FPC 0 Remote Intake OK 25 degrees C / 77 degrees F
FPC 0 GEPHY1 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY2 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY3 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY4 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY5 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY6 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY7 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY8 OK 20 degrees C / 68 degrees F
FPC 0 GEPHY9 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY10 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY11 OK 25 degrees C / 77 degrees F
FPC 0 GEPHY12 OK 20 degrees C / 68 degrees F
Fans FPC 0 Fan 1 OK Spinning at normal speed
FPC 0 Fan 2 OK Spinning at normal speed{master:0}
root> show ex2200-48t-4g
JUNOS Base OS boot [12.3R12.4]
JUNOS Base OS Software Suite [12.3R12.4]
JUNOS Kernel Software Suite [12.3R12.4]
JUNOS Crypto Software Suite [12.3R12.4]
JUNOS Online Documentation [12.3R12.4]
JUNOS Enterprise Software Suite [12.3R12.4]
JUNOS Packet Forwarding Engine Enterprise Software Suite [12.3R12.4]
JUNOS Routing Software Suite [12.3R12.4]
JUNOS Web Management [12.3R12.4]
JUNOS FIPS mode utilities [12.3R12.4]{master:0}
root>