(BUY 6 GET 4 FREE,Add 10) SUNLU 1.75mm PA/PETG/PLA/PLA+/ASA/ABS 3D Filament 1KG For Sale

SUNLU Dryer Box:S1 PlusS2S4 ProS4SP2E2AMSMax heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：85℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMS

SUNLU Filament：

PLA Light Weight：Low density and lightweight, the same model is about 30% lighter than PLA; matte texture, easy to color, specially made for 3D printed model airplanes.

• Printing Temp&Speed：

180-200℃：30-100mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：20±4 MPa
• Flexural Strength：35±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：2.5±1 KJ/m2
• Heat Distortion (HDT)：53±3 ℃

PLA：PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！

• Printing Temp&Speed：

200-210℃：50 -100mm/s

210-240℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：40±6 MPa
• Flexural Strength：65±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：5±3 KJ/m2
• Heat Distortion (HDT)：55±5 ℃

High Speed PLA：Supports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.

• Printing Temp&Speed：

190-210℃ ：50-150mm/s

210-230℃ ：150-300mm/s

230-260℃ ：300-600mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：39±5 MPa
• Flexural Strength：70±5MPa
• (X-Y) Izod Impact Strength of Notched Specimen：4.5±2 KJ/m2
• Heat Distortion (HDT)：57±4 ℃

PLA+：The wire has good toughness and is not brittle or broken; Has good comprehensive mechanical performance, particularly resistant to drops, with an impact strength of up to 8KJ/m2, which is 2-3 times that of other PLA+ on the market;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

PLA+2.0 ：It has good toughness, 2-3 times that of regular PLA+ , and is resistant to drops and impacts.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

PETG：PETG combines the easy printability of PLA with the strength of ABS. It has excellent chemical and water resistance, making it suitable for printing functional parts. It’s tough and doesn’t easily break while printing.

• Printing Temp&Speed：

230-240℃：50 -100mm/s

240-260℃：100-200mm/s

• Heated Bed Temp：60℃-70℃
• Tensile Strength：48±10 MPa
• Flexural Strength：70±10 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：3±1 KJ/m2
• Heat Distortion (HDT)：70±5 ℃

High Speed Matte PETG ：PETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

240-250℃：100-300mm/s

260-270℃：300-600mm/s

• Heated Bed Temp：70℃-80℃
• Tensile Strength：46±5MPa
• Flexural Strength：75±6MPa
• (X-Y) Izod Impact Strength of Notched Specimen：3±1.5KJ/m2
• Heat Distortion (HDT)：70±2 ℃

SILK PLA+ ：Silky texture with strong shine, smooth and soft appearance; high interlayer strength, so printed models are not easy to crack or break.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-235℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±4MPa
• Flexural Strength：78±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 3.5±1.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

PLA Meta：Good liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.

• Printing Temp&Speed：

185-195℃：50-100mm/s

195-225℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±5MPa
• Flexural Strength：85±6MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 6.5±2.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

PLA Matte：Matte finish makes printed models feel more textured, ditching the plastic look;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-230mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：39±6 MPa
• Flexural Strength：72±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 5±2 KJ/m2
• Heat Distortion (HDT)： 55±5 ℃

High Speed PLA Matte：Supports printing speeds of 600mm/s, greatly improving printing efficiency; matte finish makes printed models feel more textured.

• Printing Temp&Speed：

190-210℃ 50-150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：27±4 MPa
• Flexural Strength：50±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 8±3 KJ/m2
• Heat Distortion toughness and high impact resistance ensure that printed parts are strong and durable; low shrinkage rate means high dimensional accuracy for printed models; 95℃ heat deflection temperature gives it some heat resistance, making it suitable for a wide range of uses.
  • Printing Temp&Speed：

  250-270℃：50-100mm/s

  270-290℃：100-200mm/s

  • Heated Bed Temp：80-100℃(Insulated and sealed environment,better effect)
  • Tensile Strength：35±5 MPa
  • Flexural Strength：60±10 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 15±5 KJ/m2
  • Heat Distortion (HDT):95±5 ℃
  TPU（90A）：Shore hardness 90A, highly elastic and wear-resistant;99.9% highly effective at preventing bacteria and mold, stays clean for a long time; excellent aging resistance, longer service life;
  • Printing Temp&Speed：

  220-240℃：≤40mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：30±3 MPa
  • Flexural Strength：/
  • (X-Y) Izod Impact Strength of Notched Specimen: /
  • Heat Distortion (HDT):36±2 ℃
  TPU（95A）：Hardness 95A, combining flexibility and toughness.
  • Printing Temp&Speed：

  220-240℃：≤40mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength： 31±3 MPa
  • Flexural Strength：/
  • (X-Y) Izod Impact Strength of Notched Specimen: 47±5 KJ/m2
  • Heat Distortion (HDT):/
  PETG Carbon Fiber： Contains 10% carbon fiber, high strength and toughness, printed parts are drop- and smash-resistant; with more carbon fiber, it hides layer lines.
  • Printing Temp&Speed：

  240-250℃：50 -150mm/s

  • Heated Bed Temp：70-80℃
  • Tensile Strength：32±4 MPa
  • Flexural Strength：55.5±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 7±2 KJ/m2
  • Heat Distortion (HDT):71±3 ℃
  ASA：Strong weather resistance, printed items can be used outdoors; high toughness, suitable for regular engineering parts; heat resistant up to 96°C, suitable for a variety of uses.
  • Printing Temp&Speed：

  250-260℃：50 -100mm/s

  260-280℃：100-200mm/s

  • Heated Bed Temp：90-110℃
  • Tensile Strength：39±4 MPa
  • Flexural Strength：68±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 7±3KJ/m2
  • Heat Distortion (HDT):101±2 ℃
  High Speed PLA Marble：The marble effect is realistic, with delicate printing and high precision; Printed works have a marble texture;Supports high-speed printing up to 600mm/s;Smooth printing without clogging;Low shrinkage rate, printing large-sized building models without warping edges;
  
  • Printing Temp&Speed：

  190-210℃：50-150mm/s

  210-230℃：150-300mm/s

  230-260℃：300-600mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：41±6 MPa
  • Flexural Strength：72±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 11±3 KJ/m2
  • Heat Distortion (HDT):55±3 ℃
  PLA Holz：PLA containing 15% wood powder, the model has a woody texture and aroma!
  • Printing Temp&Speed：

  195-205℃ 50-100mm/s

  205-215℃ 100-150mm/s

  215-260℃ 150-400mm/s

  • Heated Bed Temp：60-65℃
  • Tensile Strength：33±6 MPa
  • Flexural Strength：55±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 6±3 KJ/m2
  • Heat Distortion (HDT): 55±3 ℃
  PLA Carbon Fiber：PLA with 15% carbon fiber; the printed models are lightweight and strong.
  • Printing Temp&Speed：

  215-225℃ 50-100mm/s

  225-245℃ 100-200mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：44±5 MPa
  • Flexural Strength：79±5 MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 3.5±1.5 KJ/m2
  • Heat Distortion (HDT):55.5±3 ℃
  PLA Glow in the Dark：The printed model can glow at night after absorbing light, sunlight, or UV light;The brightness and duration of glow after absorbing UV light > sunlight > lamp light
  • Printing Temp&Speed：

  205-210℃;50-100mm/s

  210-240℃;1000-200mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：40±6MPa
  • Flexural Strength：65±6MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 5±3KJ/m2
  • Heat Distortion (HDT):55±5℃
  PETG Glow in the Dark： PETG that can glow at night after absorbing light;
  • Printing Temp&Speed：

  240-260℃;≤300mm/s

  • Heated Bed Temp：70-80℃
  • Tensile Strength：48±10MPa
  • Flexural Strength：70±10MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 3.0±1KJ/m2
  • Heat Distortion (HDT): 70±5℃
  SILK Dual/Tri/Four Color： Silky texture with strong luster, showing a soft 2/3/4 color change from different angles, with a delicate and gentle appearance;
  • Printing Temp&Speed：

  210-230℃;50-200mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：50±4MPa
  • Flexural Strength：78±5MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 3.5±1.5KJ/m2
  • Heat Distortion (HDT): 57±3℃
  PLA Galaxy： It has a color-changing iridescent effect, so you can see different colors when looking at the printed model from the same spot but different angles.
  • Printing Temp&Speed：

  200-230℃;≤250mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：43.3±6MPa
  • Flexural Strength：80.3±10MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 3.8±1.2KJ/m2
  • Heat Distortion (HDT): 54.6±3℃
  PLA Matte Dual Color： The printed model shows a soft two-tone change from different angles, giving it a strong sense of visual layering; the delicate matte surface enhances the model's premium feel and artistic expression.
  • Printing Temp&Speed：

  205-215℃;50-100mm/s

  215-245℃;1000-230mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：39±6MPa
  • Flexural Strength：72±6MPa
  • (X-Y) Izod Impact Strength of Notched Specimen: 5±2KJ/m2
  • Heat Distortion (HDT): 55±5℃
  SUNLU Engineering Filament 1.75mmPrinting Temp&SpeedHeated Bed TempFeatureEasy PA250-270℃；50-100mm/s
  270-280℃；100-150mm/s30-50℃NO CRACKS & ANTI-WARPING - Nylon 3d printer filament offers excellent printing quality with no cracks or warping. Neat SUNLU Filament ensures smoother print surface.HEAT RESISTANT PA - Heat resistance up to 121°C. Nylon filament Tools are ideal for high-temp applications, such as fuel dispensers, electronic surface mount devices.EASY TO USE & UV RESISTANCE - Larger spool inner diameter makes feeding smoother. SUNLU Nylon Filament 1.75mm features uv-resistance, no brittleness or 20% short carbon fiber; light weight ; heat deflection temperature is 209°C; high strength and toughness;High strength, prints are strong and durable.
  High toughness, the prints are resistant to falling and smashing.
  Frosted texture on the surface of the 20% carbon fiber; heat deflection temperature is 176°C; high strength and toughness;High impact resistance, anti-drop and anti-smash;
  Excellent durability and resistance to abrasion and wear;
  Lower density and lighter mass;
  Low water absorption, high printing precision and dimensional heat resistance (temperature resistance 102℃);
  Ultra-high toughness, high impact resistance (notched impact strength: 70KJ/m²);
  Can be used for secondary surface treatment (e.g. electroplating, PP glue）1. Low density and lightweight, printing the same model weighs about 27% less than PLA;
  2. Can directly touch food;
  3. Excellent resistance to chemical corrosion. Will not deform, damage, or melt in strong acid and alkali (PH 0.5-14) environments;
  4. High toughness, not easily broken, with excellent durability and fatigue lac glue）High toughness, hot deformation temperature of 100 ℃, no cracking or warping during printingFR-ABS

  240-250℃ 50-100mm/s

  250-260℃ 100-200mm/s80-90℃（Apply glue）V0 flame retardant level, good impact resistance, drop resistance, low warpage, no crackingPA6-GF

  270-290℃ 50-120mm/s

  50-70℃（Apply glue）Containing 25% glass fiber, with a thermal deformation temperature of 205 ℃;
  High strength, high toughness, low shrinkage, no cracking or warping during printingPrinting tips:

  We recommend using wear-resistant nozzles made of tungsten caroffere or hardened steel to print engineering materials and replacing them regularly.

  Engineering materials have high shrinkage stresses and are prone to cracking when printed at low ambient temperatures.Therefore, closed printers or thermal enclosures are required for printing.Open prints have a higher failure rate;

  Drying Temperature/DurationAnnealing temperatureEasy PA
  PA6-CF
  PA6-GF
  PA12-CF70℃- ≥24h
  80℃- ≥12h
  90℃- ≥10h
  110℃- ≥4h90℃-12H
  110℃-6H
  130℃-3HPC-ABS70℃- ≥12h
  80℃- ≥6hno need Annealing

  Contact us

  The best way to contact us is by messages.
  We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
  Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
  We commit you 100% satisfaction guarantee.

  response

  1.We will appreciate a positive response with all 5 star rating when you aresatisfied.

  2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.

  3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.

  4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.