When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Creality Filament Dryer Space Pi Filament Storage Box 3D Printer Filament Dryer:
$59.99
Creality Filament Dryer Space Pi Filament Storage Box 3D Printer Filament DryerAbout this item - Double 110W PTC Heater 360° Hot-air Heating: Official Creality Space Pi filament dryer employs a unique 110W PTC heater, which ensures uniform drying, durability, energy efficiency, and eco-friendly. The built-in fan of the filament dryer is evenly heated by the hot air 360° cycle, effectively drying and wet silk, and improving the printing effect. Dryer box input voltage: 110V 50/60Hz
- One-button Setting of Drying Temperature: The Creality filament dryer allows you to set the drying temperature for different types of filaments at the touch of a button. Including PLA, ABS, TPU, PETG, PP, PC, PA (nylon), PET, PLA-CF, PA-CF, PETG-CF, ASA 12 types of filaments. Of course, you can also freely set the temperature between 45°C and 70°C. The heating time can be freely set between 0 and 48 hours
- LCD Touch Screen: Four separate control buttons for easy navigation and use. Users can easily and quickly set the correct drying temperature and time for different 3D filament types, ambient temperature, humidity and other factors. The 3.7-inch touch screen display clearly shows the drying temperature and drying time, allowing you to monitor the drying situation in real time. And it supports switching between ℃ and ℉ temperature
- Parameter Memory in Case of Power Failure: After a power failure, the filament dryer can be restarted and remembers the previous material and temperature settings, so a reset is not required for fast drying
- Wide Compatibility: Creality Space PI Dryer compatible with most 1KG spool 1.75mm/2.85mm 3D Printer filament. And can be used with a variety of common filaments, like PLA, PETG, TPU, ABS, and even high-performance composite materials like PLA-CF, PA-CF, ASA
About this item - 【Two Rolls Capacity Design】:It contains 2 rolls of 1kg filaments and is also equipped with 4 filaments holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time
- 【Double PTC 360° Hot-air Heating】: The dryer quickly heats with a built-in fan,circulating hot air 360° for uniform heating effectively drying moisture filaments and improving printing results
- 【LCD Touch Screen】: The Creality Space Pi Filament Dryer Plus comes with 4-inch touch screen for easy operation,making it simple for you to track drying conditions
- 【One-kry Set for Filaments】: It has one-key temperature settings for different filament types,supporting up to 12 types of filaments,including common and high-performance composite like PLA-CF,PA-CF,ASA.Of course,you can also freely adjust the temperature between 45℃ and 70℃
- 【48 Hours Timer Function】: The heating duration can be freely set from 0-48 hours,allowing the filaments to be fully dried for better printing results
- 【Parameter Power-off Memory Function】: After a power outage,the machine can restart and still remember your previous material and temperature settings,eliminating the need for resetting and allowing for quick drying
About this item - Note: Please make sure that other brands' plastic trays are heat resistant, please use Creality high quality rfid filament with plastic trays.
- Creality Space Pi X4 Filament Dryer: Creality Filament Dryer 4 Spools revolutionizes filament drying with 4 spools dry and print at once for maximum efficiency. With eight filament holes and PTFE tubing, this innovative dryer meets the need for drying multiple filaments and allows printing on four printers at the same time
- Dual Chambers Independent Temperature Control: Creality Space Pi X4’s each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament types at different temperatures in one machine
- 200W+200W PTC Heats Up to 85℃, ldeal for Engineering Filaments: Creality Space Pi X4 Filament Dryer has dual 200W PTC heaters, paired with insulated chambers, significantly improve heating efficiency, allowing temperatures to reach up to 85'C. This ensures continuous and effective drying of engineering filaments such as PA, PAHT, PC
- Flexible and Energy-Efficient Drying: Creality Space Pi X4 Filament Dryer has help you choose between single or dual chamber modes for energy-efficient drying. Single-chamber operation saves up to 40%energy,it's eco-friendly and cost-effective
About this item - Dry 4 Spools at Once: Dry and print at once for maximum efficiency. Effortless multi-color printing, seamless multi-filament drying. Moist filaments can cause stringing, clogs, layer shifts, and poor adhesion. The SpacePi drying box quickly removes moisture, restores filament to its optimal state, and ensures smooth extrusion and consistent print quality
- Dual Independent Chambers, Customized Drying: Each chamber features its own PTC heater, al-lowing independent temperature control. One machine, tailored to dry different filaments simultaneously. Supports 1kg/2kg spools, with 1.75mm or 2.85mm filament diameters. Fits spools up to 200mm in diameter and 150mm in width, handling most common filaments with ease
- High-Temp Drying up to 75°C: Dual 200W PTC heaters with insulation design provide stable, efficient heat. PLA, PETG, ABS... all dry effortlessly, keeping your filaments print-ready at all times
- Advanced PTC Technology for Even Drying: Ceramic PTC heating elements positioned near the fan deliver stable hot air. 360° hot-air circula-tion wraps around the filament, dispersing moisture evenly. Desiccant regen-eration during the drying process
- Smart Sensors, Precise Control: Same advanced sensor as the X4 for faster, more reliable monitoring. Catches even the tiniest shifts in temperature and humidity
- Flexible Drying Modes, Energy-Smart: Switch between single and dual-chamber modes as needed. Single-chamber mode saves up to 40% energy, giving you flexible, cost-effective drying options
- Responsive LCD Touchscreen Control: Featuring a new display design with anti-static treatment, it delivers excellent visibility even in winter. The built-in au-to-drying mode and real-time humidity monitoring keep your filament in optimal condition at all times
- Dual-Layer Insulation, Safe to Touch: Double insulation locks in heat. Internal temperature reaches up to 75°C while the exterior stays ≤60°C, safe to handle
- Dual Overheat Protection, Safe and Reliable: Built-in PTC self-resetting fuses automatically cut power if overheating occurs, reconnecting once temperature returns to normal. NTC sensors monitor the outlet; any abnormality pauses the drying process usContact usPayment
- We accept Paypal,Google Pay,CreditCard,Visa,MasterCard,etc.
- Payment must be within 7 days after you ordered the item.
Shipping- U.S. Free Standard Shipping
- We are offering standard free shipping every day on U.S. orders shipping.
- This free shipping offer excludes Alaska and Hawaii, P.O. Box or APO/FPO/DPO, and International orders.
- The normal order's handling time will be within 1-3 business days. Please note, some items may require a longer ship-out and/or delivery timeframe and will detail in product bullet points.
- Our standard shipping method is ground shipping. We will ship your order via any of the major mail carriers, including UPS, FedEx, and the United States Postal Service.
Returns- If the printer cannot be opened or damaged when delivered, or the seller sends the wrong goods/products that are inconsistent, you can submit a request within 30 days to return, and get a full refund.
- About 3D printer products, we provide free replacement of extruder kits within 3 months and provide a 1-year warranty for all major parts including the motherboard, motor, screen display and hotbed. Please contact the online customer service in advance for any return request for damage.
- Regarding the returned printer, we do not undertake the shipping costs if it's not the printer itself problem.
- Except for logistics reasons, if the customer does not want/the customer directly rejects the package/returns for personal reasons after delivery (must be in a new state), you may need to bear the freight sent by the seller and the cost of the package return.
About us- We only sell Genuine Creality 3D Printer And Accessories.
- All products have official authorization.
Contact us- We would love to help you! Please give us 24 hours to respond.
- Please include as much information about your order. The order number, picture or video of the wrong or broken parts, and white manufacture barcode attached on the printer base can assist you more efficiently.
- Please note that our customer representative response maybe will delay due to the holidays and weekends.
|
