When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You are buying a used but in perfect working condition, Forcepoint 1101 network appliance* that has been reloaded with a fresh installation of the latest version of pfSense (Community Edition).
It is powered by a dual core Pentium D1508 CPU (same family as Xeon D-1500) and it comes with 16GB of DDR4 RAM and a 64GB SSD drive (cFast). It has 8 Gigabit Ethernet ports and two 10GB SFP+ ports.There is also an option slot for networking modules.I configured the Ethernet port 0 as the WAN and and bridged the remaining ports as members of the same LAN (switch configuration).An IPMI port is also available for remote access and monitoring (see pictures). Credentials for the IPMI are admin/admin. The IPMI is configured via DHCP, so check your router for the IP to access it.
The pfSense configuration page can be accessed at 192.168.10.1, with admin and Passw0rd credentials. There is a VGA connector, as well as a few USB ports for keyboard use, so it can easily be managed as a normal PC. In case you need console access, baud rate is set at 115200.
As you can see from the dashboard screenshot, it was able to route ~9Gb of traffic.
The pictures are of the actual device you will receive. Comes with power cable.
Thanks
____* The hardware is actually made by Nexcom.
