When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fits the GMKtec EVO-X5 Pro in a 19" rack at 2U, lying on its side on a full width bracket that carries it across both rails. The front panel stays reachable, with the power button and the USB4 ports clear, and the body is vented so a 5.5 lb AI mini PC is not sitting in its own heat.
FITS
- GMKtec EVO-X5 Pro (Ryzen AI Max+ PRO 495)
⚠️ Before you order and install:
- Check your label says EVO-X5 Pro. The EVO-X1, EVO-X2 and EVO-X3 are a different chassis, and the X1 and X2 have their own mounts in my shop.
- The EVO-X5 Pro lies flat in this mount rather than standing on end. GMKtec supports horizontal placement, so nothing has to come off the case to fit it.
WHAT YOU GET
- One 3D printed mount, with both ends left open so the front panel and the rear 10GbE, HDMI and power stay reachable.
- Rack screws are not included. Use whatever your rack takes.
MATERIAL
PETG, not PLA. A 330W AI mini PC under sustained load puts out real heat, and PETG holds its shape where PLA would soften.
💬 For any custom design requests please message me.
![19\](img-netscan/g/CLoAAeSwKHFq0Zcu/s-l1600/19-GMKtec-EVO-X5-Pro-Mini-PC-Rack-Mount-2U.jpg "19\")
