Vulnerability Assessment Scanning and Penetration Testing by VSS, LLC.
Home


Search:


APC 1500VA Smart UPS with SmartConnect, SMC1500C Sinewave UPS Battery Backup, For Sale


APC 1500VA Smart UPS with SmartConnect, SMC1500C Sinewave UPS Battery Backup,
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

APC 1500VA Smart UPS with SmartConnect, SMC1500C Sinewave UPS Battery Backup,:
$449.99

APC 1500VA Smart UPS with SmartConnect, SMC1500C Sinewave UPS Battery Backup, AVR, 120V, Line Interactive Uninterruptible Power Supply
Key Features
  • Output: 900W / 1440 VA
  • Input: 120V @ 50/60 Hz ±3 Hz
  • 8 x NEMA 5-15R Battery Backup Outlets
  • NEMA 5-15P Input Connection (6' Cord)
  • 680-Joule Surge Energy Rating
  • Recharge Time: up to 3 Hours
  • Line Interactive Topology
  • Sine Waveform
  • Cold-Start Capable
  • $150,000 Lifetime Equipment Protection

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, theSmart-UPS C Battery Backup & Surge Protector with SmartConnectfromAPChas a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 146 minutes of use at 50W, 90 minutes of use at 100W, 49.2 minutes of use at 200W, 32.5 minutes of use at 300W, 23.5 minutes of use at 400W, 18 minutes of use at 500W, 14.2 minutes of use at 600W, 11.5 minutes of use at 700W, 9.4 minutes of use at 800W, and 7.8 minutes of use at 900W.

This Smart-UPS C features an output of 900W / 1440 VA, an input of 120V @ 50/60 Hz ±3 Hz, eight NEMA 5-15R battery backup outlets, a NEMA 5-15P input connection, a surge energy rating of 680 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is a USB cable. Support is provided by a limited 2-year repair or replace warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

SMC1500C FeaturesCold-Start CapableProvides temporary battery power when the utility power is out.Green ModePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.High Online EfficiencyReduces utility costs, generates less heat.LCD Status DisplayProvides key UPS status at a glance. There are multiple status indicators with load and battery bar graphs.Pure Sine Wave OutputSimulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Smart-UPS Features & BenefitsAdaptabilityAdjustable Voltage-Transfer PointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable Voltage SensitivityProvides the ability to adapt the UPS for improved performance in specific power environments or generator applications.SafetySafety-Agency ApprovedHelps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.ManageabilitySerial ConnectivityProvides management of the UPS via a serial port.USB ConnectivityProvides management of the UPS via a USB port.Disconnected Battery NotificationWarns when a battery is not available to provide backup power.Network ManageableProvides remote power management of the UPS over the network.Audible AlarmsActively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.LED Status IndicatorsQuickly understand the unit and power status with visual indicators.ServiceabilityBattery Failure NotificationProvides early-warning fault analysis on batteries, thus enabling timely preventive maintenance.User-Replaceable BatteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR).Hot-Swappable BatteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced.Predictive Failure NotificationProvides early-warning fault analysis, helping to ensure proactive component replacement.Resettable Circuit BreakersEnables a quick recovery from overload events.AvailabilityIntelligent Battery ManagementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power ConditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Automatic Self-TestA periodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic Restart of Loads After UPS ShutdownAutomatically starts up the connected equipment upon the return of utility power.UPC: 731304322764In the Box
  • APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect
  • Powerchute Business Edition Software
  • USB Cable
  • Limited Lifetime $150,000 Equipment Protection Policy

Total Outlets8x NEMA 5-15RPlug TypeNEMA 5-15PSurge Energy Rating680 JoulesMaximum Wattage900 WFull-Load Runtime7.8 MinutesGeneralTotal Outlets8x NEMA 5-15RProtected Outlets8x NEMA 5-15R (Battery and Surge)Plug TypeNEMA 5-15PUSB Charging PortsNoSmartSlot InterfaceNoCoax ProtectionNoData Line ProtectionRJ45CommunicationsUSB via Type-A
Serial via RJ45Emergency Power Off (EPO) SupportNoNoise Filtering0.3%TopologyLine InteractiveTransfer Time6 to 10 msPowerSurge Energy Rating680 JoulesMaximum Wattage900 WNominal Input Voltage120 VACInput Voltage Range93 to 130 VACInput Voltage Adjustable Range85 to 136 VACInput Frequency50/60 Hz ± 3Hz (Auto Sensing)Nominal Output Voltage120 VACOutput Voltage Range110 to 127 VACOutput Frequency60 Hz ± 3HzVoltage Distortion<5%Load Capacity1440 VAThermal Dissipation225 BTU/HourWaveformSine WaveBatteryChemistryLead-AcidFull-Load Runtime7.8 MinutesHalf-Load Runtime20.4 MinutesRecharge Time3 HoursUser ReplaceableYesReplacement BatteryRBC6Hot-Swap SupportYesExternal Battery ConnectionNoEnvironmentalOperating Temperature32 to 72°F / 0 to 40°COperating Humidity0 to 95%Storage Temperature5 to 113°F / -15 to 45°CStorage Humidity0 to 95%Storage Altitude0 to 50,000' / 0.00 to 15,240mNoise Level45 dBAPhysicalCable Length6' / 1.83mRackmount SizeNoDimensions (W x H x D)6.73 x 8.62 x 17.28" / 170.94 x 218.95 x 438.91mmWeight44.3lb / 20.09kgPackaging InfoPackage Weight48 lbBox Dimensions (LxWxH)23 x 13 x 12.5"
Buy Now

Other Related Items:



Related Items:

CyberPower LX1500GU3 1500VA / 900W Battery Backup picture

CyberPower LX1500GU3 1500VA / 900W Battery Backup

$179.99



SMT1500RM2UNC APC UPS, Line Interactive, 1500VA, 6x 5-15R. Net Card, picture

SMT1500RM2UNC APC UPS, Line Interactive, 1500VA, 6x 5-15R. Net Card,

$150.00



APC by Schneider Electric Pro BN 1500VA 10 Outlets 2 USB Back-UPS BN1500M2 picture

APC by Schneider Electric Pro BN 1500VA 10 Outlets 2 USB Back-UPS BN1500M2

$199.99




VSS, LLC.

P.O. Box 827051

Pembroke Pines, FL 33082-7051

Vulnerability Scanning Solutions, LLC.