When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Listing Grid template example Product Photo Description Adtran 2nd GEN TOTAL ACCESS 908e P/N: 4242908L1 IP Business Gateway-TESTED/RESET
Up for sale is a Adtran 2nd GEN TOTAL ACCESS 908e P/N: 4242908L1 IP Business Gateway-TESTED/RESET. This item has been TESTED, POWERED ON, FACTORY RESET, and all ports and lights are shown to be FULLY FUNCTIONAL. This item is in FAIR physical CONDITION with minor scratches, scrapes, and scuffs from previous usage and storage.
This item DOES NOT come with a POWER CABLE. No other accessories are included. Please see listing pictures for more detail.
You get exactly what you see in the pictures. Please see the pictures for more details. The best descriptions are in the pictures. Please see the pictures for a better understanding of the item\'s condition.
We do our best to describe each item. If you have any questions, feel free to contact us prior to making a purchase. Please contact us if you have any issues with your purchase before leaving a review. We try our best to resolve all version
ADTRAN, Inc. OS version A2.06.00.E
Mainline Version: M00
Checksum: 754B1D88, built on Mon Feb 15 10:38:40 2010
Upgrade key: ROM version 14.05.00.SA
Checksum: F343, built on: Thu Jun 21 13:58:08 2007
Copyright (c) 1999-2007, ADTRAN, Inc.
Platform: Total Access 908e (2nd Gen), part number 4242908L1
Serial number CFG0999919
Flash: 33554432 bytesDRAM: 134217727 bytes
TA908e uptime is 0 days, 0 hours, 7 minutes, 48 seconds
slot 0, DSP 1
DSP software version: G2.A2.05.08
DSP hardware version: Freescale MSC7119
Total channels: 30
slot 0, DSP 2
DSP software version: G2.A2.05.08
DSP hardware version: Freescale MSC7119
Total channels: 30
System returned to ROM by External Hard Reset
Current system image file is system image file is system configuration file is system
ADTRAN, Inc. OS version A2.06.00.E
Checksum: 754B1D88, built on Mon Feb 15 10:38:40 2010
Boot ROM version 14.05.00.SA
Checksum: F343, built on: Thu Jun 21 13:58:08 2007
Copyright (c) 1999-2007, ADTRAN, Inc.
Platform: Total Access 908e (2nd Gen), part number 4242908L1
Serial number CFG0999919
Flash: 33554432 bytesDRAM: 134217727 bytes
TA908e uptime is 0 days, 0 hours, 8 minutes, 0 seconds
System returned to ROM by External Hard Reset
Current system image file is system image file is Source:AC
System primary clock source configuration:INTERNAL
System secondary clock source configuration:INTERNAL
System current active clock source:INTERNAL
T1 Framer Version: QuadFalc56 auto-link
AutoLink: Disabled
Use Http: Disabled
Server URL:
Server SERVER:
Recontact Interval: 3600 seconds
Last Contact: Not Discovered
Next Contact:
Status: Not buffers
Buffer handles:335 of 4000 flash
9996443 9242916-20A206.biz
(dir)1024 coeff
4563 startup-config.bak
10135425 bytes used, 21633630 available, 31769055 hosts
Name/address lookup uses domain name service
DNS Proxy is disabled
Default domain is not set
Name servers are 0.0.0.0
There are currently no interfaces
Displaying interfaces...
t1 0/1 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:09:49
loss of frame: 1, current duration 00:09:49
loss of signal : 1, current duration 00:09:49
AIS alarm: 0
Remote alarm: 0
DS0 Status: Legend: \'-\' = DS0 is not allocated
\'X\' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxB: Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 382 Severely Errored Frame Seconds
382 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/2 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:09:49
loss of frame: 1, current duration 00:09:49
loss of signal : 1, current duration 00:09:49
AIS alarm: 0
Remote alarm: 0
DS0 Status: Legend: \'-\' = DS0 is not allocated
\'X\' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxB: Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 382 Severely Errored Frame Seconds
382 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/3 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:09:49
loss of frame: 1, current duration 00:09:49
loss of signal : 1, current duration 00:09:49
AIS alarm: 0
Remote alarm: 0
DS0 Status: Legend: \'-\' = DS0 is not allocated
\'X\' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxB: Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 382 Severely Errored Frame Seconds
382 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
t1 0/4 is DOWN
Transmitter is sending remote alarm
Receiver has loss of signal, loss of frame
T1 coding is B8ZS, framing is ESF
FDL type is ANSI
Line build-out is 0dB
No remote loopbacks, No network loopbacks
Acceptance of remote loopback requests enabled
Tx Alarm Enable: rai
Last clearing of counters 00:09:49
loss of frame: 1, current duration 00:09:49
loss of signal : 1, current duration 00:09:49
AIS alarm: 0
Remote alarm: 0
DS0 Status: Legend: \'-\' = DS0 is not allocated
\'X\' = DS0 is allocated (nailed)
Signaling Bit Status: 123456789012345678901234
RxA: ------------------------
RxB: ------------------------
TxB: Status: -- LOS -- Red -- Tx Yellow --
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Current Performance Statistics:
0 Errored Seconds, 0 Bursty Errored Seconds
0 Severely Errored Seconds, 382 Severely Errored Frame Seconds
382 Unavailable Seconds, 0 Path Code Violations
0 Line Code Violations, 0 Controlled Slip Seconds
0 Line Errored Seconds, 0 Degraded Minutes
eth 0/1 is administratively down, line protocol is DOWN
Hardware address is 00:A0:C8:88:20:9C
Auto-negotiate speed, full-duplex
ARP type: ARPA; ARP timeout is 20 minutes
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Queueing method: fifo
Output queue: 0/256/0 (size/max total/drops)
0 packets input, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts input
0 unknown protocol, 0 symbol errors, 0 discards
0 input errors, 0 runts, 0 giants
0 no buffer, 0 overruns, 0 internal receive errors
0 alignment errors, 0 crc errors
0 packets output, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts output
0 output errors, 0 deferred, 0 discards
0 single, 0 multiple, 0 late collisions
0 excessive collisions, 0 underruns
0 internal transmit errors, 0 carrier sense errors
0 resets, 0 throttles
eth 0/2 is administratively down, line protocol is DOWN
Hardware address is 00:A0:C8:88:20:9D
Auto-negotiate speed, full-duplex
ARP type: ARPA; ARP timeout is 20 minutes
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Queueing method: fifo
Output queue: 0/256/0 (size/max total/drops)
0 packets input, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts input
0 unknown protocol, 0 symbol errors, 0 discards
0 input errors, 0 runts, 0 giants
0 no buffer, 0 overruns, 0 internal receive errors
0 alignment errors, 0 crc errors
0 packets output, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts output
0 output errors, 0 deferred, 0 discards
0 single, 0 multiple, 0 late collisions
0 excessive collisions, 0 underruns
0 internal transmit errors, 0 carrier sense errors
0 resets, 0 throttles
fxs 0/1 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/2 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/3 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/4 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/5 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/6 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/7 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxs 0/8 is UP
Two-wire Status is: Onhook
Test Status is INACTIVE
No Tests
Impedance is:600 ohms +2.16uF
Transmit Gain is:-6.0dB
Receive Gain is:-3.0dB
Ring voltage is:50 Vrms
Signal Mode:Loop-Start
Caller ID Format is:Multiple Data Message Format
Battery Mode:Auto
Currently using :High
fxo 0/0 is DOWN
Two-wire Status:Disabled
Test Status:INACTIVE
No Tests
Impedance:600 ohms +2.16uF
Transmit Gain:+0.0dB
Receive lldp
Global LLDP information:
Sending LLDP packets every 30 seconds
Sending TTL of 120 slots, 2 DSPs, 60 channels
0 total sessions, 0 active sessions,
00:00:00 total session duration
0 total rx packets, 0 total rx bytes
0 total lost packets, 0 total unknown packets
0 total tx packets, 0 total tx bytes
0 total discards, 0 total overflows
0 total out-of-orders
Last clearing of counters: running-config
Building ADTRAN, Inc. OS version A2.06.00.E
! Boot ROM version 14.05.00.SA
! Platform: Total Access 908e (2nd Gen), part number 4242908L1
! Serial number \"TA908e\"
no enable password
!
!
ip subnet-zero
ip classless
ip auto-config
!
event-history on
no logging forwarding
no logging email
!
no service ip firewall alg msn
no ip firewall alg dot11ap eth 0/1
no ip eth 0/2
no ip t1 0/1
no shutdown
!
interface t1 0/2
no shutdown
!
interface t1 0/3
no shutdown
!
interface t1 0/4
no fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 0/3
no shutdown
!
interface fxs 0/4
no shutdown
!
interface fxs 0/5
no shutdown
!
interface fxs 0/6
no shutdown
!
interface fxs 0/7
no shutdown
!
interface fxs 0/8
no fxo 0/0
no ip tftp server
no ip tftp server overwrite
no ip http server
no ip http secure-server
no ip snmp agent
no ip ftp server
no ip scp server
no ip sntp feature-mode network
voice forward-mode con 0
no login
!
line telnet 0 4
login
no shutdown
line ssh 0 4
login local-userlist
no snmp
Chassis: Chassis ID
Contact Name:
Contact Phone:
Contact Email:
Contact Pager:
Management URL:
Management URL Label:
0 Rx SNMP packets
0 Bad community names
0 Bad community uses
0 Bad versions
0 Silent drops
0 Proxy drops
0 ASN parse thresholds
t1 0/1:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/2:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/3:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 0/4:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
Specifications Functional Condition:
F3 - Key Functions Working Cosmetic Condition:
C4 - Used Good Data Sanitization:
S3 - Data Clear
Mpn
4242908L1 Function Tests Powers On
Passed Physical Inspection
Passed Functions
Passed Buttons
Passed Shipping
Tracking information is automatically uploaded to once your order ships.
We ship orders within the contiguous US with FedEx or USPS at our discretion. We use \'s shipping calculator for all shipping rates.
PO Box, HI, AK, APO/FPO/DPO, and PR orders must be shipped via USPS. Please contact us or request an adjusted invoice before checking out. Local Pickup
If you have purchased an item and prefer to pick it up, please select “Local Pickup” from the shipping options during checkout. Then please contact us to arrange pickup.
Payment must be made through prior to pickup. Combined Shipping
We can typically provide a 30% shipping discount for multiple purchases that will fit in the same box.
For combined shipping, please click \'Request Total\' or send us a message before checking out.
We can then adjust your invoice for combined shipping. Expedited Shipping
In order to guarantee the rates and transit times shown, we must receive your order with its payment cleared by 12:00 PM EST during business days.
Orders placed after 12:00 PM EST will be shipped on the next business day.
Orders placed on weekends or holidays will be shipped the next business day.
Please plan your orders accordingly.
Returns
We strive to be a 5 star seller and hope that you are happy with your purchase.
If there is a problem with your order, please contact us through messages or by phone before leaving response. For items that are tested and working properly:
Our return window for working items listed as \"New\" or \"Used\" is 30 days.
If the item is no longer wanted or does not fit, the buyer is responsible for return shipping.
If the item is not working as described, we will work with you on the issue, please contact us to resolve. Please review all product details and sale terms before making a purchase.