When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dear Buyer,
Condition is excellent but Please pay attention to the detail pictures for better understanding about body condition, actual unit may have very minor marks / scratches and The pictures are a part of the description, Please look at all of them carefully. You will get what is shown on the pictures.
It fully tested and all functions work.
***It doesn’t comes with cable or any attachment.***
Attention buyers out of Australia:
The estimated Delivery date that you see in the ad condition, is one determined by default through , but with my experience, a small proportion of parcels arrived after 30-35 days. Thus, if you choose to purchase, do take into account that it may take up to 35 days for your parcel to arrive.
Therefore, you cannot apply request for return with the reason being that the you haven’t received the parcel before 35 days.
This doesn’t happen often and I’m not happy with this experience but unfortunately the post process is no longer in my control after I drop off the parcel to post office.
And please pay attention if item comes with power plug, definitely it comes Australian power plug and preparing adapter for you country it’s buyer responsibility.
Thanks for your for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
Superior off-axis rejection for maximum gain before response
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Self-contained electronics eliminate need for external power module
Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
Low-profile design with low-reflectance finish for minimum back plate, permanently polarized condenser
POLAR PATTERN
Half-cardioid
(cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE
30-20,000 Hz
LOW FREQUENCY ROLL-OFF
80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY
–34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE
200 ohms
MAXIMUM INPUT SOUND LEVEL
132 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)
111 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
73 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS
11-52V DC, 4 mA typical
SWITCH
Flat, roll-off
WEIGHT
9.2 oz (262 g)
DIMENSIONS
4.25\" (108.0 mm) long,
3.31\" (84.0 mm) maximum width,
0.91\" (23.0 mm) height
OUTPUT CONNECTOR
TB3M-type