When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CISCO CATALYST 2960-S series PoE+
Product Description
When the need arises to connect several computers to a networkusing a network switch, the WS-C2960S-24PS-L switch is the go-to-choice. TheWS-C2960S-24PS-L switch is part of the Cisco Catalyst 2960S series offixed-configuration Gigabit Ethernet switches with 24 ports. The 2960-S seriesswitches are capable of increasing networking efficiency while loweringownership costs for midsize business operations and campuses in need of accessapplications across their LAN Base network. The WS-C2960S-24PS-L 24-port switchand others in its series are configured into your system with space-efficientFlexstack. Cisco Flexstack modules and Cisco IOS Software allow you to combineall switches in a stack to act as a single switch unit with one Internetprotocol address, translating to lower costs and simplified management for you.Flexstack configuration also gives you a combination of Gigabit Ethernet andFast Ethernet ports in one switch. The series offers 1G Small Form-FactorPluggable (SFP) or 1G/10G SFP+ slots. The WS-C2960S-24PS-L also gives 370W ofPoE and has four SFP interfaces. Both IEEE 802.3af Power over Ethernet (PoE)and IEEE 802.3at PoE+ modules are supported by the Catalyst 2960-S series. Forfurther reduction of costs, IEEE PoE does not require power supplies from awall outlet for any PoE-enabled devices incorporated into your system. The2960-S series also incorporates STP through its IEEE 802.1D Spanning TreeProtocol to build a logical loop-free network. The Cisco CatalystWS-C2960S-24PS-L switch has 24 Ethernet 10/100/1000 ports for efficientnetworking. The series also offers USB interfaces to manage the network andtransfer files. Another key feature of the 2960-S series is Cisco CatalystSmartOperations. This software program further increases the efficiency of thenetwork administrator by automating Cisco IOS Software image installation andconfiguration when new switches are added to the network as well asautomatically configuring switch ports with devices are connected to thesystem. Cisco Catalyst SmartOperations also simplifies LAN planning,troubleshooting, and monitoring. With the Cisco Catalyst WS-C2960S-24PS-Lswitch, up to 250 LAN users have access to the network in your midsize businessor school environment. This type of type of switch configuration offersefficient stacking of multiple switches and draws power from one power supplysource. Security features also enforce basic policies that limit access tothose who have permission to use the network, which inherently cuts down onthreats to your system. The WS-C2960S-24PS-L switch makes it possible todeliver wired connectivity that is cost-effective as well as time and effortefficient across traditional desktop workspace situations.
Each Cisco Catalyst 2960-S 24PS-L 1U PoE+ switch in this has beenwiped of all previous network configuration data and has been reset to factorydefault settings (see photos).Each switch is in very good cosmetic andphysical condition, some may have minor cosmetic blemishes but this does notaffect use.
Thisswitch is running ios 12.2(55) SE2
The system has beeninterrupted prior to initializing the
flashfilesystem.The following commands will initialize
the flashfilesystem, and finish loading the operating
system software:
flash_init
boot
switch: flash_init
mifs[2]: 13 files,1 directories
mifs[2]: Totalbytes:1806336
mifs[2]: Bytesused:790528
mifs[2]: Bytesavailable :1015808
mifs[2]: mifs fscktook 0 seconds.
mifs[3]: 0 files, 1directories
mifs[3]: Totalbytes:3870720
mifs[3]: Bytesused:1024
mifs[3]: Bytesavailable :3869696
mifs[3]: mifs fscktook 1 seconds.
mifs[4]: 5 files, 1directories
mifs[4]: Totalbytes:258048
mifs[4]: Bytesused:9216
mifs[4]: Bytesavailable :248832
mifs[4]: mifs fscktook 0 seconds.
mifs[5]: 5 files, 1directories
mifs[5]: Totalbytes:258048
mifs[5]: Bytesused:9216
mifs[5]: Bytesavailable :248832
mifs[5]: mifs fscktook 0 seconds.
-- MORE --
mifs[6]: 565 files,21 directories
mifs[6]: Totalbytes:57931776
mifs[6]: Bytesused:15186432
mifs[6]: Bytesavailable :42745344
mifs[6]: mifs fscktook 14 seconds.
...doneInitializing Flash.
switch: delflash:config.text
Are you sure youwant to delete \"flash:config.text\" (y/n)?y
switch: delflash:vlan.dat
Are you sure youwant to delete \"flash:vlan.dat\" (y/n)?y
switch: boot
executing...
RestrictedRights Legend
Use, duplication,or disclosure by the Government is
subject torestrictions as set forth in subparagraph
(c) of theCommercial Computer Software - Restricted
Rights clause atFAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of theRights in Technical Data and Computer
Software clause atDFARS sec. 252.227-7013.
ciscoSystems, Inc.
170West Tasman Drive
SanJose, California 95134-1706
Cisco IOS Software,C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE2, RELEASE SOFTWARE(fc1)
Technical class=\"MsoNormal\">Copyright (c)1986-2011 by Cisco Systems, Inc.
Compiled Tue11-Jan-11 02:23 by prod_rel_team
Image text-base:0x00003000, data-base: 0x01B00000
Using driverversion 1 for media type 1
mifs[3]: 13 files,1 directories
mifs[3]: Totalbytes: 1806336
mifs[3]: Bytesused: 790528
mifs[3]: Bytesavailable : 1015808
mifs[3]: mifs fscktook 0 seconds.
mifs[4]: 0 files, 1directories
mifs[4]: Totalbytes: 3870720
mifs[4]: Bytesused: 1024
mifs[4]: Bytesavailable : 3869696
mifs[4]: mifs fscktook 0 seconds.
mifs[5]: 5 files, 1directories
mifs[5]: Totalbytes: 258048
mifs[5]: Bytesused: 9216
mifs[5]: Bytesavailable : 248832
mifs[5]: mifs fscktook 0 seconds.
mifs[6]: 5 files, 1directories
mifs[6]: Totalbytes: 258048
mifs[6]: Bytesused: 9216
mifs[6]: Bytesavailable : 248832
mifs[6]: mifs fscktook 0 seconds.
mifs[7]: 563 files,21 directories
mifs[7]: Totalbytes: 57931776
mifs[7]: Bytesused: 15181824
mifs[7]: Bytesavailable : 42749952
mifs[7]: mifs fscktook 1 seconds.
...doneInitializing flashfs.
POST: MA BIST :BeginYeti2S88gMdioWr: Unknown status for write operation
***ERR: S88G FC1MBIST Unload Activity
***ERR: S88G FC1MBIST failed
***ERR: S88G DP Sg1MBIST Unload Activity
***ERR: S88G DP Sg1MBIST failed
***ERR: S88G DP Xg1MBIST Unload Activity
***ERR: S88G DP Xg1MBIST failed
***ERR: S88G NI1MBIST Unload Activity
***ERR: S88G NI1MBIST failed
***ERR: S88G FC0MBIST Unload Activity
***ERR: S88G FC0MBIST failed
***ERR: S88G DP Sg0MBIST Unload Activity
***ERR: S88G DP Sg0MBIST failed
***ERR: S88G DP Xg0MBIST Unload Activity
***ERR: S88G DP Xg0MBIST failed
***ERR: S88G NI0MBIST Unload Activity
***ERR: S88G NI0MBIST failed
***ERR: S88GUPBMBIST Unload Activity
***ERR: S88GUPBMBIST failed
POST: MA BIST :End, Status Passed
POST: TCAM BIST :Begin
POST: TCAM BIST :End, Status Passed
Waiting for StackMaster Election...
POST: Inline PowerController Tests : Begin
POST: Inline PowerController Tests : End, Status Passed
POST: Thermal, FanTests : Begin
POST: Thermal, FanTests : End, Status Passed
POST: PortASICStack Port Loopback Tests : Begin
POST: PortASICStack Port Loopback Tests : End, Status Passed
POST: PortASIC PortLoopback Tests : Begin
POST: PortASIC PortLoopback Tests : End, Status Passed
POST: EMAC LoopbackTests : Begin
POST: EMAC LoopbackTests : End, Status Passed
Election Complete
Switch 1 booting asMaster
Waiting for Portdownload...Complete
This productcontains cryptographic features and is subject to United
States and localcountry laws governing import, export, transfer and
use. Delivery ofCisco cryptographic products does not imply
compliance withU.S. and local country laws. By using this product you
agree to complywith applicable laws and regulations. If you are unable
to comply with U.S.and local laws, return this product immediately.
A summary of U.S.laws governing Cisco cryptographic products may be found at:
If you requirefurther assistance please contact us by sending email to
Processor board IDFOC1435W4SY
Last reset frompower-on
1 Virtual Ethernetinterface
1 FastEthernetinterface
28 Gigabit Ethernetinterfaces
512K bytes offlash-simulated non-volatile configuration memory.
Base ethernet MACAddress: 68:BD:AB:EE:69:80
Motherboardassembly number: 73-11908-06
Power supply partnumber: 341-0393-02
Motherboard serialnumber: FOC14345PE4
Power supply serialnumber: DCA1424U19P
Model revisionnumber: B0
Motherboardrevision number: A0
Daughterboardserial number: FOC143541TV
System serialnumber:FOC1435W4SY
Top Assembly PartNumber: 800-30945-02
Top AssemblyRevision Number: A0
VersionID:V02
CLEI CodeNumber:COMGE00ARB
Hardware BoardRevision Number: 0x01
Switch PortsModelSWVersionSWImage
------ ------------------------------
Press RETURN to getstarted!
*Mar100:00:11.854: Read env variable - LICENSE_BOOT_LEVEL =
*Mar100:00:12.519: Module name =c2960s_lanbase Next reboot level = lanbase and License = lanbase
*Mar100:01:32.809: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack
*Mar100:01:34.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changedstate to down
*Mar100:01:34.801: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar100:02:35.273: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Mar100:02:35.273: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changedto state DOWN
*Mar1 Stack Port 2 Switch 1 has changed to state DOWN
*Mar100:02:35.655: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
*Mar100:02:35.697: %SYS-5-RESTART: System restarted --
Cisco IOS Software,C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE2, RELEASE SOFTWARE(fc1)
Technical class=\"MsoNormal\">Copyright (c)1986-2011 by Cisco Systems, Inc.
Compiled Tue11-Jan-11 02:23 by prod_rel_team
*Mar100:02:37.511: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down
*Mar100:02:38.513: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0,changed state to down
*Mar100:02:39.671: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
---System Configuration Dialog ---
Enable secretwarning
In order to accessthe device manager, an enable secret is required
If you enter theinitial configuration dialog, you will be prompted for the enable secret
If you choose notto enter the intial configuration dialog, or if you exit setup without settingthe enable secret,
please set anenable secret using the following CLI in configuration mode-
enable secret 0<cleartext password>
Would you like toenter the initial configuration dialog? [yes/no]: no
Switch>
Product Identifiers
Brand
Cisco
Model
MPN
Key Features
Form Factor
Rack-Mountable
Ports Qty
24
Data Transfer Rate
88000 Mbps
Data Link Protocol
Ethernet, Fast Ethernet (100-Mbit/s), Gigabit Ethernet (1000-Mbit/s)
Compatibility
PC
Features
Other Features
ARP support, Access Control List (ACL) support, BOOTP support, Broadcast Storm Control, DHCP snooping, DHCP support, DiffServ support, Dynamic ARP Inspection (DAI), Dynamic Trunking Protocol (DTP) support, High Availability, IGMP snooping, IPv6 support, Jumbo Frames support, Layer 2 switching, MLD snooping, Multicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Per-VLAN Spanning Tree Plus (PVST+), PoE+, Port Aggregation Protocol (PAgP) support, Quality of Service (QoS), Rapid Spanning Tree Protocol (RSTP) support, Syslog support, Trivial File Transfer Protocol (TFTP) support, Unicast Storm Control, VLAN support, auto-negotiation, auto-uplink (auto MDI/MDI-X), dynamic IP address assignment, load balancing, power over Ethernet (PoE)
Status Indicators
Port status, link activity, port transmission speed, port duplex mode, power, system
Networking
Networking Type
Switch
Connectivity Technology
Wired
Switching Protocol
Ethernet
Remote Management Protocol
FTP, HTTP, HTTPS, RMON, RMON 1, RMON 2, RMON 3, RMON 9, SNMP, SNMP 1, SNMP 2, SNMP 2c, SNMP 3, SSH, TFTP, Telnet
Power Over Ethernet (PoE)
Yes
MAC Address Table Size
8K entries
Connectors
Interfaces
1 x USB - 4 pin USB Type A, 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45, 1 x management - console - RJ-45, 1 x management - console - mini-USB Type B, 24 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
Power
Power Source
AC 120/230 V ( 50/60 Hz )
Power Supply
Power supply - internal
Technical Features
Encryption Algorithm
SSL
Memory
Flash Memory
64 MB flash
RAM Memory
128 MB
Dimensions
Width
17.5 in.
Height
1.8 in.
Depth
15.2 in.
Weight
13 lbs
Miscellaneous
EnclosureType
Rack-mountable - 1U
Humidity Range Operating (Range)
10 - 95%
Min Operating Temperature
23 ˚F
This listing includes:
One (1) Cisco Catalyst 2960-S series POE+ 24 Port Switch
One (1) Heavy Duty (Server-Grade) Brand New Power Cord
Two (2) Genuine Cisco Mounting Brackets
Four (4) Genuine Cisco Mounting Bracket Screws
ID# M1014
Please contact uswith any questions you may have and thanks for your interest! We canaccommodate free local pickup M-F during regular office hours with 24 hournotice for appointment. If you\'d like to pickup locally please reach out with arequest after sale and wait for invoice to be adjusted and sent reflecting freelocal pickup.
Thank you for yourinterest in our listings and don\'t forget to view our other great products atour store :)
