When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
National Instruments PXIe-8510 PXI Vehicle Multiprotocol Interface Module
ThePXIe-8510(Part Number784122-01) is aPortable Multiprotocol Interface Modulethat comes with 6 Ports and is an equipment selectable controller zone organization interface, as well as a local interconnect device for creating applications with an NI Controller.
XNET is a function incorporated in theNI PXIe-8510, which exceeds expectations in applications that require fast ongoing control of several casings and CAN signals, such as hardware-in-the-loop simulation, quick generation of control models, bus checking, mechanization control, and many others. The DMA motor controlled by the NI-XNET gadget empowers the inside processor to move outlines and CAN motions between the interface and the client program without intruding on the CPU, which limits message dormancy and arranges for the season of the fundamental processor for process complex models and applications. The NI-XNET driver can be used to program and design NI-XNET links. With the capacity to meet the developing benchmarks for higher information rates, CAN FD is the generation of rapid CAN communication. NI has empowered speed to 8 Mb/s utilizing the TJA1043 handset through the NI-XNET driver. As the handset suppliers meet the CAN FD speed criteria, NI will refresh its documentation, as essential.
TheNI PXIe 8510offers a CAN HS/FD and/or LIN interface with equipment selectable NI-XNET handset links, a NI-XNET driver for creating casing and signal applications in LabVIEW, LabWindows ™/CVI, and C/C ++, along with a driven DMA motor for coupling to host memory to limit message latency.
On Jan 18, 2024 at 15:14:46 PST, seller added the following information:
