Watchguard Firebox XTM5 XTM 535 Firewall VPN Appliance NC2AE8 + Rack Ears TESTED For Sale

Used decommissioned unit.
Both available units are identical in hardware and firmware version. Services and Upgrades are different though they are all expired since 2016.
Units were not opened and are still running the original OS. Firmware version is 11.9.4 Build B463675.
Overall cosmetic condition is very good. Few light scratches.Has NOT been reset to factory settings. It can be booted in safe mode so the Quick Setup Wizard can be run and old configuration overwritten.
Can also be modified to run PFSense or OPNSense.PLEASE NOTE: We are not the original owners of this appliance and cannot transfer its ownership, if any.Includes the following:
- Watchguard Firebox XTM5 XTM 535 (P/N: NC2AE8)
- Rack EarsNo documentation or other accessories CONSOLE American Megatrends, Inc.
MB-7580 Ver.WD0 04/26/2010
CPU : Pentium(R) Dual-Core CPU E5300 @ 2.60GHz
Speed : 2.60 GHzPress DEL to run Setup (F4 on Remote Keyboard)
Press n if you want to boot from the network
Press F11 for BBS POPUP (F3 on Remote Keyboard)
The MCH is operating with DDR2 800
DRAM Timing: USB Controllers .. Done.
2014MB OK GNU GRUB version 0.97 (639K lower / 2060928K upper WatchGuard (SysA) |
| WatchGuard (SysB) |
| WatchGuard (SysA) Safe Mode |
| |
| |
| |
| |
| |
| |
| |
| |
| Use the ^ and v keyssss to select which entry is highlighted.
Press enter to boot the selected OS or \'p\' to enter a
password to unlock the next set of features.
Booting \'WatchGuard (SysA)\'root (hd0,2)
Filesystem type is ext2fs, partition type 0x83
kernel /bzImage ro root=/dev/hda3 console=ttyS0,115200 crashkernel=10M@32M wg_p
tfm=xtm5
[Linux-bzImage, setup=0x3200, size=0x299760][ 0.000000] Linux version 3.0.34 (release@cmfarm06) (gcc version 4.4.5 (WatchGuard Inc./crosstool-ng version: 0.1.5/1.9.0) ) #1 SMP Fri Dec 12 15:47:07 PST 2014
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dda0000 (usable)
[ 0.000000] BIOS-e820: 000000007dda0000 - 000000007ddae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ddae000 - 000000007ddf0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ddf0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7dda0 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [400ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-000000007dda0000
[ 0.000000] Reserving 16MB of memory at 496MB for crashkernel (System RAM: 2013MB)
[ 0.000000] ACPI: RSDP 000f9170 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7dda0000 00034 (v01 042610 RSDT1157 20100426 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dda0200 00084 (v01 042610 FACP1157 20100426 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dda0440 05C90 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7ddae000 00040
[ 0.000000] ACPI: APIC 7dda0390 0006C (v01 042610 APIC1157 20100426 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dda0400 0003C (v01 042610 OEMMCFG 20100426 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ddae040 00072 (v01 042610 OEMB1157 20100426 MSFT 00000097)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 2013MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 7dda0000
[ 0.000000] low ram: 0 - 7dda0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0007dda0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dda0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @bcda6000 s27008 r0 d22144 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511347
[ 0.000000] Kernel command line: ro root=/dev/sda3 console=ttyS0,115200 crashkernel=10M@32M wg_ptfm=xtm5
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 2021128k/2061952k available (2985k kernel code, 40372k reserved, 1860k data, 376k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffdd6000 - 0xfffff000 (2212 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xbe5a0000 - 0xff9fe000 (1044 MB)
[ 0.000000] lowmem : 0x40000000 - 0xbdda0000 (2013 MB)
[ 0.000000] .init : 0x414bc000 - 0x4151a000 ( 376 kB)
[ 0.000000] .data : 0x412ea557 - 0x414bb580 (1860 kB)
[ 0.000000] .text : 0x41000000 - 0x412ea557 (2985 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1024
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2593.405 MHz processor.
[ 0.010001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.92 BogoMIPS (lpj=8644683)
[ 0.016668] pid_max: default: 32768 minimum: 301
[ 0.020076] Mount-cache hash table entries: 512
[ 0.023538] CPU: Physical Processor ID: 0
[ 0.026667] CPU: Processor Core ID: 0
[ 0.030001] mce: CPU supports 6 MCE banks
[ 0.033338] CPU0: Thermal monitoring enabled (TM2)
[ 0.036667] using mwait in idle threads.
[ 0.040749] ACPI: Core revision 20110413
[ 0.046697] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.050298] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088502] CPU0: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz stepping 0a
[ 0.096661] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.099995] ... version: 2
[ 0.103328] ... bit width: 40
[ 0.106661] ... generic registers: 2
[ 0.109994] ... value mask: 000000ffffffffff
[ 0.113327] ... max period: 000000007fffffff
[ 0.116660] ... fixed-purpose events: 3
[ 0.119993] ... event mask: 0000000700000003
[ 0.123520] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.126748] Booting Node 0, Processors #1
[ 0.013332] Initializing CPU#1
[ 0.230006] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.233344] Brought up 2 CPUs
[ 0.236654] Total of 2 processors activated (10377.63 BogoMIPS).
[ 0.241148] NET: Registered protocol family 16
[ 0.247297] ACPI: bus type pci registered
[ 0.251456] dca service started, version 1.12.1
[ 0.256000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.263329] PCI: not using MMCONFIG
[ 0.266792] PCI: Using configuration type 1 for base access
[ 0.277299] bio: create slab <bio-0> at 0
[ 0.283081] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.291798] ACPI: Interpreter enabled
[ 0.293316] ACPI: (supports S0 S5)
[ 0.297211] ACPI: Using IOAPIC for interrupt routing
[ 0.300003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.307622] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.309982] PCI: Using MMCONFIG for extended config space
[ 0.320436] PCI: Using host bridge windows from ACPI; if necessary, use \"pci=nocrs\" and report a bug
[ 0.323525] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.326814] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.329987] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.333314] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.339980] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.343313] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xdfffffff]
[ 0.346646] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.351186] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.353719] pci 0000:00:01.0: PCI bridge to [bus 08-08]
[ 0.356954] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.360291] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.363623] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.366957] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.370289] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 0.373622] pci 0000:00:1c.5: PCI bridge to [bus 07-07]
[ 0.376813] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.380509] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 0.391446] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.398631] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.405868] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.410324] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.417522] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.424828] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.433341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.441822] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.449219] SCSI subsystem initialized
[ 0.453316] usbcore: registered new interface driver usbfs
[ 0.458840] usbcore: registered new interface driver hub
[ 0.464190] usbcore: registered new device driver usb
[ 0.466749] PCI: Using ACPI for IRQ routing
[ 0.475728] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.476892] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.479983] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.484236] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.490102] Switching to clocksource hpet
[ 0.494358] FS-Cache: Loaded
[ 0.497271] CacheFiles: Loaded
[ 0.500356] pnp: PnP ACPI init
[ 0.503419] ACPI: bus type pnp registered
[ 0.507638] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.514252] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.522215] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.528304] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.534234] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.540152] system 00:0a: [io 0x0480-0x04bf] has been reserved
[ 0.546071] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.552687] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.559489] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.566232] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.573193] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.579894] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.586724] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.593687] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.600646] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.607604] system 00:0f: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.614671] pnp: PnP ACPI: found 16 devices
[ 0.618855] ACPI: ACPI bus type pnp unregistered
[ 0.660227] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.668075] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.675914] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.683758] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.691602] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.699442] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[ 0.707276] pci 0000:00:01.0: PCI bridge to [bus 08-08]
[ 0.712497] pci 0000:00:01.0: bridge window [io disabled]
[ 0.718157] pci 0000:00:01.0: bridge window [mem disabled]
[ 0.723816] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.731556] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.736781] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.742876] pci 0000:00:1c.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.749661] pci 0000:00:1c.0: bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[ 0.757401] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.762625] pci 0000:00:1c.1: bridge window [io 0xa000-0xafff]
[ 0.768720] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.775505] pci 0000:00:1c.1: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.783246] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.788468] pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
[ 0.794563] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.801348] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.809089] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.814314] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.820407] pci 0000:00:1c.3: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.827194] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.834933] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 0.840157] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.846251] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.853036] pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.860779] pci 0000:00:1c.5: PCI bridge to [bus 07-07]
[ 0.866000] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.872096] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.878880] pci 0000:00:1c.5: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.886622] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.891845] pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff]
[ 0.897939] pci 0000:00:1e.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.905184] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.911288] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.917991] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.924698] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.931406] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.938106] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.944812] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.951512] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.958309] NET: Registered protocol family 2
[ 0.962725] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.970050] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.978245] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.985123] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.991738] TCP reno registered
[ 0.994885] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.000908] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.007542] NET: Registered protocol family 1
[ 1.011958] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.018671] pci 0000:00:1d.0: PCI INT A disabled
[ 1.023298] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.030010] pci 0000:00:1d.1: PCI INT B disabled
[ 1.034633] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.041340] pci 0000:00:1d.2: PCI INT C disabled
[ 1.045961] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.052667] pci 0000:00:1d.3: PCI INT D disabled
[ 1.057289] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.064007] pci 0000:00:1d.7: PCI INT A disabled
[ 1.068672] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.096960] WG CPU Model 686005300 Hypervisor \'Bare\'
[ 1.102014] WG VMALLOC RESERVE 320 MB
[ 1.106024] WG CRASH MIN RESERVE 16 MB
[ 1.113488] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.120043] msgmni has been set to 3947
[ 1.123942] alg: No test for cipher_null (cipher_null-generic)
[ 1.129789] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 1.135720] alg: No test for digest_null (digest_null-generic)
[ 1.141564] alg: No test for compress_null (compress_null-generic)
[ 1.148195] alg: No test for stdrng (krng)
[ 1.152340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.159735] io scheduler noop registered
[ 1.163657] io scheduler deadline registered
[ 1.167938] io scheduler cfq registered (default)
[ 1.173545] input: Power Button as 1.181723] ACPI: Power Button [PWRB]
[ 1.185438] input: Power Button as 1.192839] ACPI: Power Button [PWRF]
[ 1.198233] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 1.204136] XENFS: not registering filesystem on non-xen platform
[ 1.210232] hv_utils: Registering HyperV Utility Driver
[ 1.215460] hv_vmbus: registering driver hv_util
[ 1.240488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.267495] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.307179] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.370821] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.407341] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.423764] intel_rng: FWH not detected
[ 1.429192] brd: module loaded
[ 1.433055] loop: module loaded
[ 1.436365] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.443872] scsi0 : ata_piix
[ 1.446835] scsi1 : ata_piix
[ 1.450755] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.457720] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.464796] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.471935] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.477473] scsi2 : ata_piix
[ 1.480419] scsi3 : ata_piix
[ 1.484288] ata3: SATA max UDMA/133 cmd 0x7c00 ctl 0x7880 bmdma 0x7400 irq 19
[ 1.491432] ata4: SATA max UDMA/133 cmd 0x7800 ctl 0x7480 bmdma 0x7408 irq 19
[ 1.498986] ehci_hcd: USB 2.0 \'Enhanced\' Host Controller (EHCI) Driver
[ 1.505527] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.512670] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.517919] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.525340] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.531610] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.540044] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe4ff800
[ 1.556680] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.562575] hub 1-0:1.0: USB hub found
[ 1.566333] hub 1-0:1.0: 8 ports detected
[ 1.570445] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.576817] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.583956] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.589189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.596596] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00007080
[ 1.602461] hub 2-0:1.0: USB hub found
[ 1.606217] hub 2-0:1.0: 2 ports detected
[ 1.610301] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.617449] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.630949] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.638375] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007000
[ 1.644240] hub 3-0:1.0: USB hub found
[ 1.647115] ata1.00: ATA-0: TRANSCEND, 20101008, max MWDMA2
[ 1.647117] ata1.00: 1993824 sectors, multi 0: LBA
[ 1.658435] hub 3-0:1.0: 2 ports detected
[ 1.680081] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.687375] ata1.00: configured for MWDMA2
[ 1.691478] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.696772] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.704191] scsi 0:0:0:0: Direct-Access ATA TRANSCEND 2010 PQ: 0 ANSI: 5
[ 1.712303] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006c00
[ 1.718210] hub 4-0:1.0: USB hub found
[ 1.721983] hub 4-0:1.0: 2 ports detected
[ 1.721999] sd 0:0:0:0: [sda] 1993824 512-byte logical blocks: (1.02 GB/973 MiB)
[ 1.722034] sd 0:0:0:0: [sda] Write Protect is off
[ 1.722052] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn\'t support DPO or FUA
[ 1.722054] ROOT = /dev/sda3 (973 MB)
[ 1.751093] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.758241] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.763486] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.770927] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00006880
[ 1.771474] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.781683] hub 5-0:1.0: USB hub found
[ 1.785436] hub 5-0:1.0: 2 ports detected
[ 1.786799] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.794234] usbcore: registered new interface driver usbserial
[ 1.800095] USB Serial support registered for generic
[ 1.805174] usbcore: registered new interface driver usbserial_generic
[ 1.811705] usbserial: USB Serial Driver core
[ 1.816080] USB Serial support registered for pl2303
[ 1.821072] usbcore: registered new interface driver pl2303
[ 1.826641] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 1.832761] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.841975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.846955] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.852113] rtc_cmos 00:03: RTC can wake from S4
[ 1.856832] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.862940] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.869747] i2c /dev entries driver
[ 1.873319] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.880758] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 1.886403] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 1.894011] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.900035] IT87 WDT: no device
[ 1.903165] EDAC MC: Ver: 2.1.0
[ 1.906465] cpuidle: using governor ladder
[ 1.910594] hv_vmbus: registering driver hid_hyperv
[ 1.915524] usbcore: registered new interface driver usbhid
[ 1.921101] usbhid: USB HID core driver
[ 1.925006] TCP cubic registered
[ 1.928241] Initializing XFRM netlink socket
[ 1.932537] NET: Registered protocol family 10
[ 1.937208] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.942612] NET: Registered protocol family 17
[ 1.947062] NET: Registered protocol family 15
[ 1.951517] Using IPI No-Shortcut mode
[ 1.955396] registered taskstats version 1
[ 1.959955] rtc_cmos 00:03: setting system clock to 2010-04-26 00:03:04 UTC (1272240184)
[ 1.984626] VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
[ 1.991272] Freeing unused kernel memory: 376k freed
[ 1.996382] Write protecting the kernel text: 2988k
[ 2.001288] Write protecting the kernel read-only data: 1500k
[ 2.007028] NX-protecting the kernel data: 3156k
[ 2.076681] Refined TSC clocksource calibration: 2593.499 MHz.
[ 2.082525] Switching to clocksource tsc
[ 3.040279] Running /etc/runlevel/1/S02rootrw...Done.
[ 3.042192] Running /etc/runlevel/1/S05mproc...Done.
[ 3.043023] Running /etc/runlevel/1/S05sysfs...Done.
[ 3.044045] Running /etc/runlevel/1/S10armled...Done.
[ 3.049387] Running random generator
[ 3.050798] Done.
[ 3.059449] Running /etc/runlevel/2/S10var...Done.
[ 3.060447] Running /etc/runlevel/2/S11shm...Done.
[ 3.060933] Running /etc/runlevel/2/S13devpts...Done.
[ 3.061929] Running /etc/runlevel/2/S14temp...Done.
[ 3.062684] Running 3.064877] Running check SYSA file
[ 3.068657] S16checkgrub passed: No Action Required!
[ 3.068733] Done.
[ 3.068750] Running /etc/runlevel/2/S16pending...Done.
[ 3.069362] Running /etc/runlevel/2/S18data...fsck 1.41.0 (10-Jul-2008)
[ 3.110960] e2fsck 1.41.0 (10-Jul-2008)
[ 3.153729] /dev/wgrd.sysa_data: recovering journal
[ 4.112908] /dev/wgrd.sysa_data: clean, 505/39816 files, 172604/642000 blocks
[ 3.664481] EXT3-fs: barriers not enabled
[ 3.668804] kjournald starting. Commit interval 5 seconds
[ 3.674305] EXT3-fs (sda6): using internal journal
[ 3.679097] EXT3-fs (sda6): mounted filesystem with writeback data mode
[ 4.403986] Done.
[ 4.404025] Running /etc/runlevel/2/S18hotplug...Done.
[ 4.957684] Running /etc/runlevel/2/S18kdump...Done.
[ 5.250297] Running /etc/runlevel/2/S19fips...Done.
[ 5.251068] Running /etc/runlevel/2/S[ 4.540470]
[ 4.540471] wg_shim_init: Built Dec 12 2014 15:49:48 CPUs 2
[ 4.540472]
19ipv6...disabli[ 4.549595] wg_shim_init: xfrm_skb_cb 36 Hw_callback_data 12
ng IPv6 autoconf for all
[ 5.251796] disabling IPv6 autoconf for default
[ 5.251842] enable IPv6 forwarding for all
[ 5.251882] enable IPv6 forwarding for default
[ 4.571464] pkp_drv: module license \'CAVIUM\' taints kernel.
[ 5.251926] d[ 4.577422] Disabling lock debugging due to kernel taint
isabling IPv6 fo[ 4.584817] Cavium Driver --- 1.01.00
r all
[ 5.25[ 4.589168] Nitrox-PX found at Bus 8 Slot 0
1959] disabling [ 4.594774] pci 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.602816] Using memory-mapped bar for device 0x177D:0x10
IPv6 for default[ 4.608305] bar 0: fdfff000[ 5.251996] Done.
[ 5.252013] Running /etc/runlevel/2/S20cavium...[ 4.628697] NO DDR on the chip
[ 4.631839] Resorting to Context memory on Host.
[ 4.636452] part number=1605
[ 4.639336] totoal number of cores=2
[ 4.642994] Finished Initializing this device
[ 4.647348] Total Number of Nitrox Devices: 1
[ 4.653018] Starting poll_thread
[ 4.656260] device count = 1
[ 4.659147] Starting poll_thread
[ 4.659244] Registration is a success The major device number is 125
[ 4.659246] To talk to the device driver, please use device appropriate device node.
[ 4.659247] Device\'s minor number corresponds to the microcode to be used.
[ 4.659248] Please read the README file for further instructions
[ 4.659249]
[ 4.659264] Loaded Cavium Driver --- 1.01.00
[ 4.695077] device count = 1
[ 6.925662] Write 0xf00000ff into CORE ENABLE after Interrupt bits check
[ 6.932366] UEN = 0x3
[ 6.934644] Final Core Mask = 0x00000003
[ 6.938569] Loaded Boot microcode
[ 6.945910] All cores joined to group 0,REG_EXEC_GRP: 0x11111111
[ 6.951916] Additional setup for CN1600
[ 6.955747] Config: Device Control Reg (offset 0x78): 0x00092810
[ 6.961744] PCI-E Link error detected: 0x00090000
[ 6.966459] Disabling units: mask 0x3
[ 6.970127] Loading ucode 4
File: /lib/microcode/boot_mc2_px.out
[ 8.172492] Version = CNPx-MC-BOOT-2.00
[ 8.172536] Code length = 17536 Data length = 152
[ 8.172608] 0: name=[ 7.467201] Initializing USB Mass Storage driver...
/lib/microcode/b[ 7.473244] usbcore: registered new interface driver usb-storage
oot_mc2_px.out, [ 7.480544] USB Mass Storage support registered.
index=0, core=0
[ 8.172672] File: /lib/microcode/main_ipsec2_px.out
[ 8.172722] Version[ 7.494280] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
= CNPx-MC-IPSE[ 7.500965] e100: Copyright(c) 1999-2006 Intel Corporation
C-MAIN-0006
[ [ 7.507897] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
8.172768] Code length = 38448 Data length = 1176
[ 8.172817] 1: name=/lib/microcode/main_ipsec2_px.out, index=4, core=2
[ 8.172899] CSP1 core assignments
[ 8.172934] BOOT : 0x000000
[ 8.172967] IPSEC_MLM : 0x000003
[ 8.172999] Done.
[ 8.173017] Running /[ 7.540867] e100 0000:01:08.0: eth0: addr 0xfe5ff000, irq 20, MAC addr 8.173072] Running 8.173565] Running /etc/r[ 7.559860] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
unlevel/2/S20sig[ 7.566135] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
s...Done.
[ [ 7.573486] e1000e 0000:02:00.0: Disabling ASPM L0s
8.178626] Runnin[ 7.579812] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
g /etc/runlevel/2/S20usb...Done.
[ 8.204825] Running /etc/runlevel/2/S20wgbase...Done.
[ 8.208128] Running /etc/runlevel/2/S21eth...[ 7.695291] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:90
[ 7.703295] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 7.710333] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 7.717125] e1000e 0000:03:00.0: Disabling ASPM L0s
[ 7.722104] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.835269] e1000e 0000:03:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:91
[ 7.843270] e1000e 0000:03:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 7.850309] e1000e 0000:03:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 7.857099] e1000e 0000:04:00.0: Disabling ASPM L0s
[ 7.862078] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.975270] e1000e 0000:04:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:92
[ 7.983271] e1000e 0000:04:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ 7.990308] e1000e 0000:04:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 7.997100] e1000e 0000:05:00.0: Disabling ASPM L0s
[ 8.002087] e1000e 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.115253] e1000e 0000:05:00.0: eth4: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:93
[ 8.123255] e1000e 0000:05:00.0: eth4: Intel(R) PRO/1000 Network Connection
[ 8.130293] e1000e 0000:05:00.0: eth4: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 8.137083] e1000e 0000:06:00.0: Disabling ASPM L0s
[ 8.142054] e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.255259] e1000e 0000:06:00.0: eth5: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:94
[ 8.263266] e1000e 0000:06:00.0: eth5: Intel(R) PRO/1000 Network Connection
[ 8.270303] e1000e 0000:06:00.0: eth5: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 8.277094] e1000e 0000:07:00.0: Disabling ASPM L0s
[ 8.282065] e1000e 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.395268] e1000e 0000:07:00.0: eth6: (PCI Express:2.5GT/s:Width x1) 00:90:7f:9a:06:95
[ 8.403276] e1000e 0000:07:00.0: eth6: Intel(R) PRO/1000 Network Connection
[ 8.410313] e1000e 0000:07:00.0: eth6: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
Done.
[ 9.136043] R[ 8.419664] Parallel LCM Driver Version 0.0.6 is loaded
unning /etc/runlevel/2/S21frontpanel...Done[ 8.580252] W627THF devid detection = 130
.
[ 9.298406[ 8.584572] Logical Device GPIO2 disabled, no function, enabling now
] Running /etc/r[ 8.592309] GPIO2(bit4) not configured for LED triggering, configuring now
unlevel/2/S21vm...Done.
[ 9.310525] Running /etc/runlevel/2/S22flashrom...[ 8.623348]
[ 8.624842]
[ 8.626339]
[ 8.627849]
Done.
[ 9.347649] Running /etc/runlevel/2/S22hwmon...[ 8.836267] w83627hf: w83627hf: Found W83627THF chip at 0xa00
Done.
[ 9.561217] Running /etc/runlevel/2/S22login...Done.
[ 9.561635] Running /etc/runlevel/2/S22rtc...Done.
[ 9.569044] Running /etc/runlevel/2/S23pppo[ 8.855921] PPP generic driver version 2.4.2
e...[ 8.864406] PPP MPPE Compression module registered
[ 8.870315] PPP Deflate Compression module registered
[ 8.876120] NET: Registered protocol family 24
Done.
[ 9.600565] Running /etc/runl[ 8.884536] tun: Universal TUN/TAP device driver, 1.6
evel/2/S23sslvpn[ 8.890814] tun: (C) 1999-2004 Max Krasnyansky 9.616705] Running /e[ 8.901163] L2TP core driver, V2.0
tc/runlevel/2/S2[ 8.905933] L2TP netlink interface
4l2tpvpn...[ 8.911610] PPPoL2TP kernel driver, V2.0
Done.
[ 9.633802] Running /etc/runlevel/2/S25core...Done.
[ 9.634457] Running /etc/runlevel/2/S25wgcfg...Info: No conversion required from version 11.9.4 to 11.9.4.
[ 10.024372] Done.
[ 10.024418] Running /etc/runlevel/2/S27cfgcheck...Config ok
[ 10.579293] Done.
[ 10.579362] Running /etc/runlevel/2/S29wgcore...Done.
[ 10.612017] Running /etc/runlevel/2/S30bonding...[ 9.902070] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 9.909212] bonding: MII link monitoring set to 100 ms
Done.
[ 10.632640] Running /etc/runlevel/2/S30net...[ 9.921829] Bridge firewalling registered
[ 9.927853] Ebtables v2.0 registered
[ 9.940883] GRE over IPv4 demultiplexor driver
[ 9.947277] GRE over IPv4 tunneling driver
[ 9.952130] bvpn vif handlers are registered
[ 9.959766] 802.1Q VLAN Support v1.8
Done.
[ 10.683471] Running /etc/runlevel/2/S30upgrade...Done.
[ 10.684603] Running /etc/runlevel/2/S31cacert...Done.
[ 10.686645] Running /etc/runlevel/2/S31cert...Done.
[ 10.740946] Running /etc/runlevel/2/S31crypto...[ 10.027838]
[ 10.027839] wg_crypto_init: Built Dec 12 2014 15:49:48 FIPS 0 Nitrox CN1605
[ 10.027840]
[ 10.037784] wg_crypto_init: Insert aead 10.045192] alg: No test for authenc(digest_null,cbc(des3_ede))-wg 10.054850] wg_crypto_init: Insert aead 10.061835] alg: No test for authenc(digest_null,cbc(aes))-wg (authenc(digest_null,cbc(aes))-wg)
[ 10.070621] wg_crypto_init: Insert aead 10.078199] alg: No test for authenc(hmac(sha1),ecb(cipher_null))-wg 10.088192] wg_crypto_init: Insert aead 10.095514] alg: No test for authenc(hmac(sha1),cbc(des3_ede))-wg 10.104985] wg_crypto_init: Insert aead 10.111867] alg: No test for authenc(hmac(sha1),cbc(aes))-wg 10.838735] Running /etc/ru[ 10.122915] Netfilter messages via NETLINK 10.130837] ip_set_init[1869]: ip_set: protocol 5
10.839164] Running /etc/runlevel/2/S31xtables...[ 10.160708] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.166826] nf_conntrack_init_init_net: conntrack max=65536 high water mark=52428
[ 10.178946] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.190264] nf_ct_ftp: Maximum expected value 1
[ 10.205450] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 10.212437] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 10.221347] ctnetlink v0.93: registering with nfnetlink.
[ 10.249350] arp_tables: (C) 2002 David S. Miller
[ 10.261714] u32 classifier
[ 10.264453] Performance counters on
[ 10.268292] input device check on
[ 10.271953] Actions configured
[ 10.278983] Mirror/redirect action on
Done.
[ 11.002682] Running 11.009129] Running /etc/runlevel/2/S32auth...Done.
[ 11.014587] Running /etc/runlevel/2/S32clst...Done.
[ 11.039387] Running /etc/runlevel/2/S32modemdrivers...[ 10.327702] USB Serial support registered for GSM modem (1-port)
[ 10.333783] usbcore: registered new interface driver option
[ 10.339356] option: v0.7.2:USB Driver for GSM modems
[ 10.346448] USB Serial support registered for Sierra USB modem
[ 10.352620] usbcore: registered new interface driver sierra
[ 10.358194] wg_sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
[ 10.367608] usbcore: registered new interface driver cdc_acm
[ 10.373268] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 10.382575] USB Serial support registered for GobiSerial
[ 10.388303] usbcore: registered new interface driver GobiSerial
[ 10.394233] GobiSerial: 2013-10-08/NTGR_2.12
[ 10.402275] usbcore: registered new interface driver cdc_ether
[ 10.409405] usbcore: registered new interface driver rndis_host
[ 10.416692] usbcore: registered new interface driver sierra_net
[ 10.427828] GobiNet: 2013-10-08/NTGR_2.21
[ 10.432255] usbcore: registered new interface driver GobiNet
Done.
[ 11.156209] Running /etc/r[ 10.440854] ipt_addrpairs_6 v0.1.0: Loading
unlevel/2/S32wgxt...[ 10.448750] xt_session6 : Loading
[ 10.452081] xt_session6 : Loaded limit 1000 hash 1024 WG IPC ID 184549376 (0x0B000000)
[ 10.481929] ipt_addrpairs: ADDRPAIRS SCALE Set MAX 32768 Entry Max 32768
[ 10.488642] ipt_addrpairs: v1.0.0 Loaded
[ 10.519182] xt_ifset: Loaded with set limit 5000 and entry limit 5000
[ 10.526305] xt_classify : Loaded
[ 10.530211] xt_master: Loaded
[ 10.533834] xt_MASTER: Loaded
[ 10.537571] xt_WGTEE: Loaded
[ 10.541409] Schedule: Loaded
[ 10.544960] xt_POLICY: Loaded
[ 10.548585] xt_policy : Loaded
[ 10.552372] xt_EXPIRES: Loaded
[ 10.556099] xt_IPPRECEDENCE: Loaded
[ 10.560964] xt_PKTCACHE: Loaded
[ 10.568235] xt_session : Loaded limit 1000 hash 1024 WG IPC ID 92274688 (0x05800000)
[ 10.581477] xt_CONNCLASSIFY: Loaded
[ 10.585630] xt_connclassify : Loaded
[ 10.590342] xt_ipspoof : Loaded
[ 10.640106] xt_LBDNAT: Loaded
[ 10.646204] xt_MWAN: Loaded
[ 10.651224] xt_psd: Loaded
[ 10.654875] xt_ipsd: Loaded
[ 10.658589] xt_ddos: Loaded
[ 10.662515] xt_dos: Loaded
[ 10.667781] xt_wgaccount: Loaded
[ 10.688933] xt_block : Loaded limit 1000 hash 1024 WG IPC ID 155189248
[ 10.696925] xt_localroute: Loaded
[ 10.701578] xt_duplicate: Loaded
[ 10.707719] xt_WGCLASSIFY: Loaded
Done.
[ 11.432021] Running /etc/runlevel/2/S33appID...[ 10.806657] * Make sure sizeof(struct sw_struct)=76 is consistent
[ 10.814707] WG workqueue: Loaded
[ 10.823493] bw driver: Loaded
Done.
[ 11.544756] Running /etc/runlevel/2/S35nr[ 10.829538] Proxy glue: Loaded 16:09:22 (196)
open...updated /proc/sys/fs/nr_open with new value: 2097152
[ 11.545326] Done.
[ 11.545344] Running /etc/runlevel/2/S35proxy...Setting the proxy tmpfs size to size=493m.
[ 11.586204] Done.
[ 11.586238] Running /etc/runlevel/2/S35scand...Done.
[ 11.592751] Running 11.593190] Running /etc/runlevel/2/S42ssh...Done.
[ 11.594338] Running /etc/runlevel/2/S44sysb...Done.
[ 11.611645] Running /etc/runlevel/2/S50nettune...Setting IPv4 route garbage collection timeout to 2 minutes
[ 11.612437] Setting promote_secondaries to 1
[ 11.612480] Done.
[ 11.612498] Running 11.613178] Running /etc/runlevel/2/S80seed-random...Saved random seed
[ 11.627503] Done.
[ 11.627544] Running /etc/runlevel/2/S90bootmon...Done.
[ 11.629816] Running 11.630564] Running /etc/runlevel/2/S99igmp...Done.
[ 11.630997] Running /etc/runlevel/2/S99rootro...Done.
[ 12.222224] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 12.227548] 8021q: adding VLAN 0 to HW filter on device eth5
[ 12.308949] ADDRCONF(NETDEV_UP): eth6: link is not ready
[ 12.314289] 8021q: adding VLAN 0 to HW filter on device eth6
[ 12.365232] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.565555] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.570890] 8021q: adding VLAN 0 to HW filter on device eth1
[ 12.577107] device eth1 entered promiscuous mode
[ 14.587647] Running SALES TERMS
----------------------Sold AS-IS, no warranty, no return.
Canadian buyers will be subject to sales taxes.Items paid using eChecks will only be sent once payment have cleared.
Typical wait time for this payment method is 8-10 business days.Faster shipping is available. Please inquire before buying.
If you have any questions, feel free to ask.
Thank you for your interest!