When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ANYCUBIC 3D Printer filament PLA 1.75mm 1KG/2.2lb Mutil-Color Material Spool Why ANYCUBIC?
Anycubic 1.75mm 3D filament uses high-quality materials, and it provides printing without clogging, bubbles and tangles. Ensure that each spool can provide the highest performance. You can use it with confidence
Parameter:
- Diameter:1.75mm±0.02mm
- Total length:340m around
- Net :1 Kg/Spool
- Nozzle Temp:190-230℃
- Hotbed Temp:No heated/50-80℃
- Tensile strength:≥55Mpa
- Density:1.25g±0.05g/cm³
- Hardness:HRC105-110
PLA Filament Install filament
1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer.
2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube.
3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle.
NOTE:
When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
On Mar 15, 2024 at 23:43:40 PDT, seller added the following information:
